MRT Boot Mounted Water Tank - Anyone Use One?
#1
Scooby Regular
Thread Starter
Join Date: May 2001
Location: Surrey Somewhere, From 341 bhp '99 STI V to '98 Merc CLK & '00 Peugeot 306 XSI to '01 E46 M3 :)
Posts: 3,301
Likes: 0
Received 0 Likes
on
0 Posts
Ok some advice needed here plz
Am conisdering one of three boot mounted water tanks:
MRT
Forge
Spec R
The MRT is cheapest, but looks thinner and taller than the Forge, anyone used one? - Does it leak? How does it fit, i.e. does it bolt to the boot floor aka the Forge?
Any advice welcome
Am conisdering one of three boot mounted water tanks:
MRT
Forge
Spec R
The MRT is cheapest, but looks thinner and taller than the Forge, anyone used one? - Does it leak? How does it fit, i.e. does it bolt to the boot floor aka the Forge?
Any advice welcome
#3
Scooby Regular
Join Date: Nov 2002
Location: North Yorks
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
Have you thought of having one made to your own spec/size etc?
I had 1 made by Ralloy Engineering - Malton - 01653 696383
www.ralloy.com
It fitted behind my rally cars drivers seat, very snug, and excellent quality.
Dremel.
I had 1 made by Ralloy Engineering - Malton - 01653 696383
www.ralloy.com
It fitted behind my rally cars drivers seat, very snug, and excellent quality.
Dremel.
#4
Scooby Regular
Thread Starter
Join Date: May 2001
Location: Surrey Somewhere, From 341 bhp '99 STI V to '98 Merc CLK & '00 Peugeot 306 XSI to '01 E46 M3 :)
Posts: 3,301
Likes: 0
Received 0 Likes
on
0 Posts
Cheers Deep, i'll give them a buzz a bit later, not sure on the one from Demon Tweeks could be a step into the unknown as it were, do you have a pic as I dont have a DT catalogue?
Dremel, Cheers, I may go down that route also, did yours leak or have any problems?
Dremel, Cheers, I may go down that route also, did yours leak or have any problems?
#6
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
demon tweeks are made by AH fabrications... I've got a water injection tank from them... excellent quality..
David
David
#7
Scooby Regular
Thread Starter
Join Date: May 2001
Location: Surrey Somewhere, From 341 bhp '99 STI V to '98 Merc CLK & '00 Peugeot 306 XSI to '01 E46 M3 :)
Posts: 3,301
Likes: 0
Received 0 Likes
on
0 Posts
Dremel,
I've droppped them an email, so waiting to see on prices, etc cheers mate
David,
Do you have a pic of your tank? - Ie what size, does it have an anti surge baffle in there as well?
Too many questions lol
I've droppped them an email, so waiting to see on prices, etc cheers mate
David,
Do you have a pic of your tank? - Ie what size, does it have an anti surge baffle in there as well?
Too many questions lol
Trending Topics
#8
Just for you Toby;
'internally baffled against surge.335mm tall,190mm diameter on a 200mm x 200mm base.Can be made to your spec'.In the photo it looks nice and is cylindrical rather than jerry can shaped like the MRT.Yes there are screws in the base to mount it.£109.84+vat.
Anymore questions?
'internally baffled against surge.335mm tall,190mm diameter on a 200mm x 200mm base.Can be made to your spec'.In the photo it looks nice and is cylindrical rather than jerry can shaped like the MRT.Yes there are screws in the base to mount it.£109.84+vat.
Anymore questions?
#9
Scooby Regular
Thread Starter
Join Date: May 2001
Location: Surrey Somewhere, From 341 bhp '99 STI V to '98 Merc CLK & '00 Peugeot 306 XSI to '01 E46 M3 :)
Posts: 3,301
Likes: 0
Received 0 Likes
on
0 Posts
Cheers Deep
Right better order meself a Demon Tweeks catalogue and have a butchers methinks.
Cheers for your help guys
Right better order meself a Demon Tweeks catalogue and have a butchers methinks.
Cheers for your help guys
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM