Autometer AFR Install....HELP

Reply Subscribe

Thread Tools

Search this Thread

17 December 2002, 09:50 PM

Omen1

Scooby Regular

Thread Starter

Join Date: Nov 2002

Posts: 41

Likes: 0

Received 0 Likes on 0 Posts

I want to install an Autometer AFR in my Jap Spec STI7. Does any one out there know which wire on the ECU you connect the AFR to?
Thanks

Reply Like

18 December 2002, 04:57 PM

lizzard

Scooby Regular

Join Date: Dec 2001

Posts: 232

Likes: 0

Received 0 Likes on 0 Posts

Can any one help me with this problem

Reply Like

18 December 2002, 05:33 PM

lizzard

Scooby Regular

Join Date: Dec 2001

Posts: 232

Likes: 0

Received 0 Likes on 0 Posts

Any one out there .... PLEASE

Reply Like

18 December 2002, 08:41 PM

DTH

Scooby Regular

Join Date: Sep 2002

Posts: 228

Likes: 0

Received 0 Likes on 0 Posts

I have dawes AFR on MY01 WRX and connected wires to
B17 signal wire
B19 ground
D2 or D3 power
hope this is of some use.

Reply Like

18 December 2002, 10:44 PM

lizzard

Scooby Regular

Join Date: Dec 2001

Posts: 232

Likes: 0

Received 0 Likes on 0 Posts

Thanks DHT
Does your MY01 have one or two lambada sensors fitted,and where on the downpipe/exhaust is it located. E.G. so many inches/feet from the turbo.

Someone told me that the STi 7 has two sensors the one closest to the turbo being a wideband sensor and will not be of use to the AFR. I am still to check on that on my friends STi.

Reply Like