Error Codes
Thread Starter
Scooby Regular
Joined: Aug 2001
Posts: 824
Likes: 0
I’m getting two ECU error codes 45 and 32, I have reset the ECU but the codes still come back.
I know the codes tabular translation, but does anyone know what is causing the errors, is it something silly like a dirty air filter or does some need replacing.
Any ideas, thoughts would be greatly appreciated.
Cheers.
Ian.
MY96 UK Turbo, Prodrive BB, ITG air filter.
I know the codes tabular translation, but does anyone know what is causing the errors, is it something silly like a dirty air filter or does some need replacing.
Any ideas, thoughts would be greatly appreciated.
Cheers.
Ian.
MY96 UK Turbo, Prodrive BB, ITG air filter.
Scooby Regular
Joined: Dec 2001
Posts: 835
Likes: 0
45 Pressure Sensor - Poss Oil contamination ie oil level too high? - Disconnect pipes - if oily clean with Brake Cleaner & try again.
32 Lambda Sensor - Could be the actual sensor or just the heat element - Stick a DVM on it - when up to temp should see it pulse above 700mv & at WOT above 820mv.
32 Lambda Sensor - Could be the actual sensor or just the heat element - Stick a DVM on it - when up to temp should see it pulse above 700mv & at WOT above 820mv.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM