Help.... ECU pin outs for a MY99 UK Turbo ?
#1
Hi
I've just bourght a Blitz i-D power meter, I require the vehicle speed sensor output form the ecu.
Does anybody have an ecu map or diagram.
Or can you confirm that it is connector B135 pin 26.
Thanks in advance
Kevin
I've just bourght a Blitz i-D power meter, I require the vehicle speed sensor output form the ecu.
Does anybody have an ecu map or diagram.
Or can you confirm that it is connector B135 pin 26.
Thanks in advance
Kevin
#2
Kevin,
according to my reading of the circuit diagram it is Connector 135 - (the Gray one) - pin number 26. SO you are indeed correct!
Cheers,
Trout
[Edited by Trout - 7/18/2002 6:57:08 PM]
according to my reading of the circuit diagram it is Connector 135 - (the Gray one) - pin number 26. SO you are indeed correct!
Cheers,
Trout
[Edited by Trout - 7/18/2002 6:57:08 PM]
#6
Well that is very wierd as I have a copy of the MY99 ECU pinouts and the same page in front of me and have two problems with the post above.
1) the ECU pin out blocks shown above are not from any Impreza that I have seen! Both in shape and in pin configuration
2) the ECU pin diagram that I have, and the corresponding connectors table - both say 135/26
3) All the 'electronic' work I have done on my car is based on the diagrams I have in front of me
Finally - what do you need the Speed sensor signal for - it's not very useful! If you need to fit a speed related control then Crankshaft is more useful (I use it for controlling my WI CU) depending on moboliser configuration it is 136 - 5 or 6.
Trout
1) the ECU pin out blocks shown above are not from any Impreza that I have seen! Both in shape and in pin configuration
2) the ECU pin diagram that I have, and the corresponding connectors table - both say 135/26
3) All the 'electronic' work I have done on my car is based on the diagrams I have in front of me
Finally - what do you need the Speed sensor signal for - it's not very useful! If you need to fit a speed related control then Crankshaft is more useful (I use it for controlling my WI CU) depending on moboliser configuration it is 136 - 5 or 6.
Trout
#7
try MRT website they have the PossumLink v5 ecu diagrams/manual which have all the wiring diagrams or mail me and i'll send it which it does say 135 #26 , thinking about it i did use the possumlink manual to wire up a blitz fctt i think thats what confused us when i download the above images and the instrutions that came with it where in japanesse so please igore the images
cheers
cheers
Trending Topics
#10
check out
http://www.ravensblade-impreza.com/index1.html
in the technical docs sections there are a couple of useful ones that include wiring diagrams, the possum link for example.
Kevin
http://www.ravensblade-impreza.com/index1.html
in the technical docs sections there are a couple of useful ones that include wiring diagrams, the possum link for example.
Kevin
#11
SCC Performance - the wiring diagrams posted above are NOT for an Impreza.
As I say I have the MY99 ECU pinout and wiring configuration which I have used to patch in a number of things and it ain't based on what is posted above - in fact I have no idea what the above refers too - although it does look Subaru sourced! Maybe it is for the SVX
Trout
PS Scooby2000 - perhaps you want to edit the above post and delete the images - just a suggestion
[Edited by Trout - 7/19/2002 7:16:02 PM]
As I say I have the MY99 ECU pinout and wiring configuration which I have used to patch in a number of things and it ain't based on what is posted above - in fact I have no idea what the above refers too - although it does look Subaru sourced! Maybe it is for the SVX
Trout
PS Scooby2000 - perhaps you want to edit the above post and delete the images - just a suggestion
[Edited by Trout - 7/19/2002 7:16:02 PM]
Thread
Thread Starter
Forum
Replies
Last Post
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM