Cambs_Stuart

iTrader: (3)

The power steering hose from the pump to the rack on my 2006 twinscroll legacy has split, pouring PS fluid over the top of the engine.
Anyone know where I can get one and how hard these are to fit?

TECHNOPUG

iTrader: (1)

Pirtek could make you one if you send it to them. Just a thought if you are struggling to find a genuine part.

Don Clark

Same as the 2.0/2.5 GT, GTX GTS

34610AG040/041/042/043 Hose assembly Power Steering

Only trouble is new it consists of both pipes
https://www.amayama.com/en/part/subaru/34610ag040
Item 16


http://opposedforces.com/parts/legac...llustration_2/

Cambs_Stuart

iTrader: (3)

There is a pirtek up the road. Given that subaru can't find a replacement hose in the UK taking the old hose up there is my best bet.

Cambs_Stuart

iTrader: (3)

Thanks Don. Now to find one...

stamina_daddy

iTrader: (3)

I had this on an old bmw.
I drove to local pirtek and removed the hose in car park and they did there and then for about 20 quid.
was a few years ago now though.
and the steering was heavy going getting it there.

Cambs_Stuart

iTrader: (3)

Hope so, otherwise I'll have to fly one in from Japan. I'll go there this morning and see how I get on.

Don Clark

Also used on European RHD MY08-13 WRX STI Hatch and Saloon and current MY14 > WRX STI