akgray

Hi All,

I have found some blob tutorials but I cant find any info on removing morettes. I have taken the 2 10mm bolts out near the grille and the one on the top (8mm I think). It seems free on the grille side but it seems stuck on the wing side, have I missed anything or does it just need a good pull?

Any help would be great I dont want to crack them :-).

Cheers

Andy

360ste

iTrader: (1)

There is a push in clip behind the light. It should just need a good pull or push from the back.

akgray

Thanks very much 360ste

Any idea where to push?, lower corner etc?

Good to know I haven't missed a bolt!

Andy

360ste

iTrader: (1)

It has been a while since I pulled mine off. I am sure it is in the lower outer edge of the light. If you look with a torch from the back of the light you should see the white plastic clip it pushes into.
Will see if I can find a picture.

360ste

iTrader: (1)

http://www.ebay.co.uk/itm/01-03-Suba...4AAOSwYGFUxZAc


This shows the back of the light, to the left of the headlight bulb holder is the ball joint that clips in.

akgray

That's great, thanks for the help.

360ste

iTrader: (1)

No problem.