Hi all, I would like to fit the biggest K&N filter on my bugeye please.

For the power that I am running, my cosworth panel filter in the standard airbox is just fine, but I want the NOISE.

So what can I fit please?

I dont mind changing pipes, having a play to get one to fit.

Many thanks
Ian


pic of my bay

 

I've got a k&n 57i fitted to blobeye and it gives a nice woosh on gear changes when on boost. Its just a normal size cone filter so not the biggest. I'm not entirely sure on the others. You can get the one I have on the scoobyworld site.
Bear in mind you would need a remap/tune when putting a cone filter on the car Luckily my one came already mapped on the car when I brought it.

 

This one seems to be the biggest.

https://www.scoobynet.com/projects-4...l#post10690384

https://www.scoobynet.com/projects-4...l#post10691166

Don't think you will make that fit easily though!

 

I have fitted a Graham goode cosworth K&N air filter utilising the RCM spun trumpet, it's about an inch and a bit larger than the RCM cone air filter.
I'll post up a pic when I get home.

 

Biggest one is a 260mm tall one, mainly for rotated set ups but can be made to fit, easier if maffless and just add joiner silicone hose

 

K&N Air Filter Dimensions overall height 210mm

small end diameter 95mm

big end diameter 200mm

mounting id 160mm

 

that looks good ScoobyLee

 

any pictures on this set up please on a standard position turbo please?

 

I have got a Ramair cone filter, which is the same as they ran on the group a imprezas with McRae.
Obviously I'm mafless so just a 45 off of the intake pipe

 

 

Not the prettiest set up, but works.
Maffless

 

Foam filter is always loudest for induction sound, going to order one this week to try on mine just trying to workout the size I need. what size is yours?

my engine bay for refrence the intake hose diameter is 80mm

 

does the job and sounds good

 

My Ramair filter has an 80mm neck, the filter itself is 280mm long.
And as you say the foam gives an awesome induction noise.

 

did you have a part number please?

 

I don't but I will find out

 

Run a K&N on mine, pretty big and works well.

Pic on link below.

http://i300.photobucket.com/albums/n...pshukkes1s.jpg

 

This one by any chance?

http://www.ramair-filters.co.uk/shop...am-air-filter/

 

No it was an fb 100 or something like that.

 

I can get the part number tomorrow