BIGGEST filter possible?
1 Attachment(s)
Hi all, I would like to fit the biggest K&N filter on my bugeye please.
For the power that I am running, my cosworth panel filter in the standard airbox is just fine, but I want the NOISE. So what can I fit please? I dont mind changing pipes, having a play to get one to fit. Many thanks Ian pic of my bay Attachment 34782 |
I've got a k&n 57i fitted to blobeye and it gives a nice woosh on gear changes when on boost. Its just a normal size cone filter so not the biggest. I'm not entirely sure on the others. You can get the one I have on the scoobyworld site.
Bear in mind you would need a remap/tune when putting a cone filter on the car :thumb: Luckily my one came already mapped on the car when I brought it. |
This one seems to be the biggest.
https://www.scoobynet.com/projects-4...l#post10690384 https://www.scoobynet.com/projects-4...l#post10691166 Don't think you will make that fit easily though! |
I have fitted a Graham goode cosworth K&N air filter utilising the RCM spun trumpet, it's about an inch and a bit larger than the RCM cone air filter.
I'll post up a pic when I get home. |
Biggest one is a 260mm tall one, mainly for rotated set ups but can be made to fit, easier if maffless and just add joiner silicone hose
|
2 Attachment(s)
Originally Posted by Scooby_Lee101
(Post 11827518)
I have fitted a Graham goode cosworth K&N air filter utilising the RCM spun trumpet, it's about an inch and a bit larger than the RCM cone air filter.
I'll post up a pic when I get home. Attachment 34772 K&N Air Filter Dimensions overall height 210mm small end diameter 95mm big end diameter 200mm mounting id 160mm |
that looks good ScoobyLee
|
Originally Posted by bustaMOVEs
(Post 11827520)
Biggest one is a 260mm tall one, mainly for rotated set ups but can be made to fit, easier if maffless and just add joiner silicone hose
any pictures on this set up please on a standard position turbo please? |
1 Attachment(s)
Attachment 34760
I have got a Ramair cone filter, which is the same as they ran on the group a imprezas with McRae. Obviously I'm mafless so just a 45 off of the intake pipe |
1 Attachment(s)
|
Originally Posted by Ian
(Post 11827712)
any pictures on this set up please on a standard position turbo please?
Maffless https://cimg7.ibsrv.net/gimg/www.sco...1a4a03d4f.jpeg |
1 Attachment(s)
my engine bay for refrence the intake hose diameter is 80mm Attachment 34758 |
1 Attachment(s)
|
My Ramair filter has an 80mm neck, the filter itself is 280mm long.
And as you say the foam gives an awesome induction noise. |
Originally Posted by RUPZ
(Post 11828012)
My Ramair filter has an 80mm neck, the filter itself is 280mm long.
And as you say the foam gives an awesome induction noise. did you have a part number please? |
I don't but I will find out
|
Run a K&N on mine, pretty big and works well.
Pic on link below. http://i300.photobucket.com/albums/n...pshukkes1s.jpg |
Originally Posted by RUPZ
(Post 11828095)
I don't but I will find out
http://www.ramair-filters.co.uk/shop...am-air-filter/ |
No it was an fb 100 or something like that.
|
I can get the part number tomorrow
|
All times are GMT +1. The time now is 12:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands