Hi sorry to bring up something thats been covered on forums before,im trying to find an install-how to wire in the above however after doing research i keep coming up with old threads that dont seem to work anymore,ie not displaying pics or page error etc

Ive got a bugeye and whilst ive wired in things before like stereos etc i wasnt sure where to best wire this unit in.-ive got a turbo timer harnessed into ignition and didnt know what impact this would/might have aswell

 

wire it into the stereo harness, you need ground, permanent feed, ignition, and illumination.

wires for sensors through bulkhead into engine bay by the pedals is where I ran mine

 

Thank you mate i did wonder where instruction said ignition etc but cool il crack on with the stereo harness.... Cheers mate

 

red, yellow, black and orange should be the ones you need in the stereo loom Iirc

 

Mate cheers

 

Red: permanent live, ie: straight to battery via an inline fuse, or from the live feed TO the IGN.

Orange: switched live, ie: only live on IGN SECOND click, NOT first click.

Yellow or white: Lighting live, live when sidelights are on.

Black: A decent earth, mine goes back to battery -ve.

Here you go: http://www.defi-shop.com/media/dlink.pdf

I just Googled "defi".