Notices
General Technical
Sponsored by:
Sponsored by: CARiD

P1 brembos?

Thread Tools
 
Search this Thread
 
Old Sep 2, 2015 | 08:52 AM
  #1  
Ned Han's Avatar
Ned Han
Thread Starter
Scooby Regular
 
Joined: Aug 2015
Posts: 102
Likes: 0
From: Belfast
Default P1 brembos?

hi, I have a p1 which is going for an engine rebuild and I don't know what spec to do it yet. Possibly a 2.1 with a bit of further scope for more horses but I don't know yet.
Also looking at a 6 speed conversion to cope with more power.
What I'm trying to figure out is a brake conversion to brembos. I know if I do the 6 speed thing I Can deal for rear brakes when I'm at it.
As for the front, can anyone tell me will brembos fit under the standard p1 17 in rims?
I have a very nice set of 18 oz's(superleggera ithink) with almost new toyos. but I might sell them to help fund the build.
Also, all the standard brakes are new with grooved discs and pads all round. Are these worth selling?
Reply
Old Sep 2, 2015 | 08:55 AM
  #2  
veerinder9's Avatar
veerinder9
Scooby Regular
iTrader: (1)
 
Joined: Jul 2012
Posts: 1,743
Likes: 0
From: wolverhampton
Default

Originally Posted by Ned Han
hi, I have a p1 which is going for an engine rebuild and I don't know what spec to do it yet. Possibly a 2.1 with a bit of further scope for more horses but I don't know yet.
Also looking at a 6 speed conversion to cope with more power.
What I'm trying to figure out is a brake conversion to brembos. I know if I do the 6 speed thing I Can deal for rear brakes when I'm at it.
As for the front, can anyone tell me will brembos fit under the standard p1 17 in rims?
I have a very nice set of 18 oz's(superleggera ithink) with almost new toyos. but I might sell them to help fund the build.
Also, all the standard brakes are new with grooved discs and pads all round. Are these worth selling?
I would look into ap's and keep the original 17s. Thats what i have on my p1. Brembos will not fit under most 17s. You should be able to get enough money to buy a second hand ap brake kit by selling your current brake set up and your 18" wheels.
Reply
Old Sep 2, 2015 | 09:02 AM
  #3  
Ned Han's Avatar
Ned Han
Thread Starter
Scooby Regular
 
Joined: Aug 2015
Posts: 102
Likes: 0
From: Belfast
Default

Thanks. I'm guessing they would be hard to come by as everybody wants them?
Is there any point in selling my 5 speed box set up?
Is it worth anything?
Standard shocks and springs?
Reply
Old Sep 2, 2015 | 10:45 AM
  #4  
Tidgy's Avatar
Tidgy
Scooby Regular
 
Joined: Sep 2004
Posts: 23,118
Likes: 150
From: Notts
Default

D2 6 pot setup will go under them, also godspeed did have an offer on on AP 6 pot 330mm kits for about £1250, personal choice would be the AP's
Reply
Old Sep 2, 2015 | 10:56 AM
  #5  
Godspeed Brakes's Avatar
Godspeed Brakes
THE braking specialist
25 Year Member
Liked
iTrader: (259)
 
Joined: Dec 2000
Posts: 8,021
Likes: 57
From: www.godspeedbrakes.co.uk
Default

This is a good spec kit that will fit under your wheels , brand new monoblock one piece Brembo 4 pot calipers , 330mm x 28mm 2 piece discs and bells , alloy brackets , and a choice of pad for £999.

http://www.godspeedbrakes.co.uk/impr...and-bells.html

We were doing a similar kit with AP 6 pots for £1250 but they have gone now , we can offer a kit using the new 9040 AP 6 pot calipers for £1595

Cheers Ian

Last edited by Godspeed Brakes; Sep 2, 2015 at 10:57 AM.
Reply
Old Sep 2, 2015 | 10:58 AM
  #6  
Ned Han's Avatar
Ned Han
Thread Starter
Scooby Regular
 
Joined: Aug 2015
Posts: 102
Likes: 0
From: Belfast
Default

Sounds good at that sort of money. At the minute I'll just have to wait and see what's in store for the engine build before idoanything else
Reply
Old Sep 2, 2015 | 10:58 AM
  #7  
Tidgy's Avatar
Tidgy
Scooby Regular
 
Joined: Sep 2004
Posts: 23,118
Likes: 150
From: Notts
Default

Originally Posted by Godspeed Brakes
This is a good spec kit that will fit under your wheels , brand new monoblock one piece Brembo 4 pot calipers , 330mm x 28mm 2 piece discs and bells , alloy brackets , and a choice of pad for £999.

http://www.godspeedbrakes.co.uk/impr...and-bells.html

We were doing a similar kit with AP 6 pots for £1250 but they have gone now , we can offer a kit using the new 9040 AP 6 pot calipers for £1595

Cheers Ian
shame, that was a decent kit vs price
Reply
Old Sep 2, 2015 | 11:04 AM
  #8  
Ned Han's Avatar
Ned Han
Thread Starter
Scooby Regular
 
Joined: Aug 2015
Posts: 102
Likes: 0
From: Belfast
Default

I'd be very keen on that. Looks like a nice bit of kit.
What would you use at the rear if I keep the 5 speed and kept power below 350hp
Reply
Old Sep 2, 2015 | 11:07 AM
  #9  
Godspeed Brakes's Avatar
Godspeed Brakes
THE braking specialist
25 Year Member
Liked
iTrader: (259)
 
Joined: Dec 2000
Posts: 8,021
Likes: 57
From: www.godspeedbrakes.co.uk
Default

Originally Posted by Tidgy
shame, that was a decent kit vs price
Yes it was , but we managed to find 9 pairs of calipers in a bankrupt stock sale at a very good price which was why the kits were so cheap , they were all snapped up very quickly
Cheers Ian
Reply
Old Sep 2, 2015 | 11:08 AM
  #10  
Godspeed Brakes's Avatar
Godspeed Brakes
THE braking specialist
25 Year Member
Liked
iTrader: (259)
 
Joined: Dec 2000
Posts: 8,021
Likes: 57
From: www.godspeedbrakes.co.uk
Default

Originally Posted by Ned Han
I'd be very keen on that. Looks like a nice bit of kit.
What would you use at the rear if I keep the 5 speed and kept power below 350hp
Either the WRX 2 pots , or better still the STi brembo 2 pots
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
just me
ScoobyNet General
25
Oct 29, 2015 10:32 AM
blackieblob
ScoobyNet General
2
Oct 2, 2015 05:34 PM




All times are GMT +1. The time now is 07:34 AM.