the shreksta

iTrader: (20)

i have a blob sti with a perrin fmic and paul @ zen has moved the maf to post intercooler location to counter compressor surge,currently the car is running an inner wing induction kit but i wish to change that as it doesnt fit well due to the large fmic pipework.

ideally i want an rcm kit but they have the maf housing in them which i dont need,can i buy a mafless trumpet or can you buy blanking plates?

only other option is a universal large k&n cone i suppose

cheers

fat-thomas

iTrader: (4)

isnt their two versions, one with maf one without?

the shreksta

iTrader: (20)

thats what i originally thought but i can only see the normal type on their website,might nip in and speak with olly as its got to be a common request for people running mafless set-ups

domino46

Yes two versions , iv got the mafless 80mm one

the shreksta

iTrader: (20)

cheers domino

b3nmw

Def. 2 versions. Think the one without the maf housing is 80mm and the one with the maf housing is slightly smaller. Give rcm or advanced automotives a call

BBB3

iTrader: (7)

Yep 2 versions

jura11

iTrader: (7)

Hi there

As above there are two versions,MAF and MAFless version

Second option you can buy Group A Induction,which is for Ford,but they should fit too Subaru or you can search for GGR induction kit for Subaru

Group A Induction kit

http://www.ebay.co.uk/sch/i.html?_fr...Text=&_sacat=0

GGR link

http://shop.grahamgoode.com/impreza-...35-66794-p.asp

Hope this helps

Thanks,Jura

the shreksta

iTrader: (20)

hi jura thanks for the reply,the second one in your links has the maf housing so is not suitable for me

cheers

jura11

iTrader: (7)

If you want to keep yours existing CAIK then I would have look on this Grimmspeed MAF Block Off Plate

http://www.rallysportdirect.com/Grim...-FXT-2002-2007

Thanks,Jura

b3nmw

Pricey the grimmspeed blank, I got 1 myself but by the time u get it from the states the price adds up

bustaMOVEs

iTrader: (31)

Yep 2 as said above, i have a maffless one ready

the shreksta

iTrader: (20)

i will pop into rcm and see what they have

fat-thomas

iTrader: (4)

Did you sort this???
Ive got the rcm one with maf in it and k and n filter that I'm not going to fit now if you're interested

the shreksta

iTrader: (20)

Bleeding typical ive just sent Mattybr5@MB a message about an rcm kit he has.i will keep u out posted Dan when he replies, im in London at the min so bear with me

Cheers

fat-thomas

iTrader: (4)

Lol, I decided to.keep my inner wing one.
Bought the rcm one on a wim

bustaMOVEs

iTrader: (31)

Dan I think the less pipe work for induction will be better for drawing air in than your inner wing one? (Closer to turbo, the better)
I'd fit the rcm.