Blobeye front arch wheel clips?
03 December 2014, 06:44 PM
#1
Scooby Regular
Thread Starter
Join Date: Nov 2012
Location: leeds
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
Blobeye front arch wheel clips?
Hi guys,
could anyone tell me which clips are needed for the front wheel arches on the blobeye please, looking through the usual sites there seems to be multiple choices of clips, so if anyone could direct me to right ones please?
my car never had them on when i bought it, so bought both sides and just a little stumped at which clips i need to order
Cheers
could anyone tell me which clips are needed for the front wheel arches on the blobeye please, looking through the usual sites there seems to be multiple choices of clips, so if anyone could direct me to right ones please?
my car never had them on when i bought it, so bought both sides and just a little stumped at which clips i need to order
Cheers
03 December 2014, 07:59 PM
#2
Scooby Regular
iTrader: (11)
Join Date: Feb 2011
Location: Newcastle upon tyne
Posts: 2,750
Likes: 0
Received 0 Likes
on
0 Posts
It's a bit marmite, they are all diff sizes, when i replaced my arch liners I ordered the complete set from SG Petch , i have hundreds of clips in garage but there is 2 or 3 wich require specific length / diam ..
Good tip tho , I used galvanised roof fixing screws with 10mm heads on for the centre top screw ... This can be pitta if corroded & rounded off ... About £2 from B&Q for 10
Good tip tho , I used galvanised roof fixing screws with 10mm heads on for the centre top screw ... This can be pitta if corroded & rounded off ... About £2 from B&Q for 10
03 December 2014, 08:37 PM
#3
Scooby Regular
Thread Starter
Join Date: Nov 2012
Location: leeds
Posts: 1,262
Likes: 0
Received 0 Likes
on
0 Posts
It's a bit marmite, they are all diff sizes, when i replaced my arch liners I ordered the complete set from SG Petch , i have hundreds of clips in garage but there is 2 or 3 wich require specific length / diam ..
Good tip tho , I used galvanised roof fixing screws with 10mm heads on for the centre top screw ... This can be pitta if corroded & rounded off ... About £2 from B&Q for 10
Good tip tho , I used galvanised roof fixing screws with 10mm heads on for the centre top screw ... This can be pitta if corroded & rounded off ... About £2 from B&Q for 10
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM