LambdaLink - no LEDs but error code 22?
30 September 2014, 10:19 AM
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: Lofty in Hull
Posts: 1,587
Likes: 0
Received 0 Likes
on
0 Posts
LambdaLink - no LEDs but error code 22?
Hi all,
MY00 turbo with quite a few mods over the years (always done properly and remapped whenever anything has been changed).
LambdaLink and KnockLink fitted many years ago and have always been fine but last week the LEDs on the LambdaLink stopped illuminating (power LED is still on though). Car is running lumpy and using tons of fuel so I suspected lambda sensor knackered.
CEL then started coming on briefly and very intermittently - stored code is 22, which I wasn't expecting.
I know code 22 is knock sensor faulty but just before I replace the sensor, given that LambdaLink is not working, should I be looking elsewhere? Could the 2 things be related or is it just coincidence?? There are no codes stored for Lambda sensor which I'm surprised at. Could it be faulty MAF sensor?
Cheers,
Steve
MY00 turbo with quite a few mods over the years (always done properly and remapped whenever anything has been changed).
LambdaLink and KnockLink fitted many years ago and have always been fine but last week the LEDs on the LambdaLink stopped illuminating (power LED is still on though). Car is running lumpy and using tons of fuel so I suspected lambda sensor knackered.
CEL then started coming on briefly and very intermittently - stored code is 22, which I wasn't expecting.
I know code 22 is knock sensor faulty but just before I replace the sensor, given that LambdaLink is not working, should I be looking elsewhere? Could the 2 things be related or is it just coincidence?? There are no codes stored for Lambda sensor which I'm surprised at. Could it be faulty MAF sensor?
Cheers,
Steve
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
jonnyboy82
Lighting and Other Electrical
0
29 September 2015 01:59 PM