Hi good morning
I'm reading in the forum info about the size of restrictor but i don't find the correct information😔
I have a my99 gt( in uk is uk2000) with the ppp ecu, ic hose and exhaust.. The car push well but turbo push 1 bar only...
The pill restrictor is the same in uk2000 and the uk2000 ppp ??
Thanks and regards!

 

yep same size pill. ppp runs 1.1bar, std runs 0.9bar. confirm on your boost gauge that it is accurate

you can adjust the actuator arm preload to make it a bit more responsive on coming on boost

 

Ok thanks i will look , because in my gauge standard was 0.9 and now with ppp ecu is 1 bar
Thanks

 

Don't forget most gauges aren't 100% accurate.

 

aye thats why i asked him to confirm on his boost gauge for both oe & ppp

if the std ran 0.8 then id say the 1.0 was correct reading, but the 0.9 std and 1.0 on ppp shows the ppp isnt make its claimed 1.1bar

i had similar with mine, and setting the preload cured it - though i was using a PSI data monitor as my gauge

 

It's a omori mechanical gauge..👍..,i think it's a good gauge
Thanks to all