Swap td05 for vf35
20 May 2014, 07:49 PM
#1
Swap td05 for vf35
I have a td05 front entry on my uk classic at the moment and have just bought a vf35 for it. Only thing is it didn't come with any of the pipes etc Will the pipes from my td05 just swap onto the vf35 or is anything different? Don't want to take the td05 off and then find I am missing something I need!
20 May 2014, 10:45 PM
#2
Scooby Regular
iTrader: (7)
Join Date: Apr 2007
Location: on the computer.... obviously!
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
One of the coolant pipes is slightly different, but it can be manipulated to fit on the vf (you may need to shorten it slightly).
Everything else will fit like for like.
Everything else will fit like for like.
22 May 2014, 11:54 PM
#3
Scooby Regular
Join Date: Dec 2012
Location: England
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
The oil feed banjo bolt is probably different. Hopefully your vf35 came with this?
Edit- when I say different, it will be the same thread size but the internal bore size you need to check.
Edit- when I say different, it will be the same thread size but the internal bore size you need to check.
Last edited by jason_2013; 22 May 2014 at 11:56 PM.
23 May 2014, 07:21 PM
#5
Scooby Regular
iTrader: (7)
Join Date: Apr 2007
Location: on the computer.... obviously!
Posts: 545
Likes: 0
Received 0 Likes
on
0 Posts
Oil feed banjo is the same between these two particular turbo's. The TD04 and the ball bearing turbo's have a smaller bore. Worth making sure you have the correct TD05 bolt to start with though, as a TD04 bolt will physically fit but has a smaller bore.
Agree to not worth swapping, unless the TD05 has give up.
Agree to not worth swapping, unless the TD05 has give up.
Thread
Thread Starter
Forum
Replies
Last Post
crazyspeedfreakz
Wanted
17
05 October 2015 07:19 PM
M4RKG
General Technical
3
30 September 2015 07:51 PM