classic fault code 23
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2007
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
classic fault code 23
Hi I have a my00 turbo and ive got fault code 23 coming up. The car coughs and splutters once you get to around 4000rpm and using alot of fue obviously as the ratio is being calculated wrong, so far I have trie:
Changing the maf for a new one.
Tested for resistance at the connection and there is.
changed plugs.
leads.
closing the gap on the connectors
really dont know what else to try, for the last month the car would miss fire at high revs underload but no light so assumed it was plugs or leads so these were changed. The other thing is that the light will some times go out and come back on a few minutes later or even flicker for a few seconds.
Any further advice or ideas would be appreciated.
Thanks
Changing the maf for a new one.
Tested for resistance at the connection and there is.
changed plugs.
leads.
closing the gap on the connectors
really dont know what else to try, for the last month the car would miss fire at high revs underload but no light so assumed it was plugs or leads so these were changed. The other thing is that the light will some times go out and come back on a few minutes later or even flicker for a few seconds.
Any further advice or ideas would be appreciated.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
serpico
ScoobyNet General
20
01 April 2019 07:47 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM