Liam135db

Hi Guys,
I'm Breaking my 2003 PPP WRX Wagon, it had a burnt exhaust valve so by the time I had the engine out and diagnosed, it wasn't financially viable to repair.
Prior to this it had been a great car and it is pretty heartbreaking to pull it apart, but I need a Cert of destruction to get my Private plate off it.
It has been sitting for a while but was in good working order other than the loss of compression in one cylinder.

All 4 Doors, including Glass, working electric windows/locks/mirrors and good condition interior skins/speakers - £50 Each Rear, £70 each front some have scratches in paintwork.Both Driver side gone

Bonnet including Scoop and hinges £100

Full prodrive exhaust including manifolds, parts have been seperated £150

4x Gold Prodrive speedline 18" Alloys (condition isn't great) c/w Michelin Pilot Sport 3 225/40ZR18 (92y) Tyres - VERY LOW MILEAGE hence £Sold

Cylinder Block £250
Cylinder Heads £60 each(valves seperated from one)
Gearbox (front driveshafts cut) £200
Locking Wheel nuts with Key £20
Front Light Clusters - £50Both Sold
Both Rear Light Clusters - £50 Each
Turbo - £125
Intercooler with prodrive Y hose £50
Inlet manifold with injectors & Throttle body £80
Front bumper with foglight surrounds Some scratches in paint Sold
Front N/S Foglight Sold.
Propshaft £35
WRX sideskirts £35
Aircon Radiator £20
Aircon Pump £30
Radiator with twin fans £40
Both Front wings complete with Clear Side Repeaters £Sold
Waist spoiler £25
Top Spoiler (one bolt cover retaining clip damaged) £25
Front Grill £25
ECU (PPP fitment cert available)£75
Airbag controller Module £20
Starter Motor £30
Alternator £30
Ignition coils £15 each
Battery (little usage) £40

Just found my Thule Roof Bars, Squarebars c/w locking feet with both keys and set of 4 load stops £50



Photos available of all parts on request
Collection From Watford Area, Delivery on smaller parts by request.

More to add tomorrow.

Prices are guides/guesses in keeping with Forum Rules, please make me an offer.
Carcass will be gone before end of week so any other bits let me know asap.

Liam135db

Just to clarify, the cylinder block is a complete unit with pistons, crankshaft, conrods, and sump all still in situ

si 42

iTrader: (1)

hi mate
how much for the front door panels ? also need all bolts for front seats
I can collect im in the heathrow area

Liam135db

Hi Si,
I've already sold the front drivers door, If anyone asks about the passenger one, I'll see if they want the panel.
Seat bolts I have in a bag as the front seats have gone, feel free to come get them if you like. Make me an offer, I guess.
I'm trying to get rid of as much as possible in as few quick transactions as I can, really!

si 42

iTrader: (1)

Hi liam
I will take the bolts please. Im working in Denham on Thursday can you pm me your phone number and I will pop over. thanks

Cannon Fodder

iTrader: (100)

Any chance of some pics of the Prodrive sports cat and mid section?

M2RTXhawkeye

iTrader: (61)

Any pics of wheels also do they clear brembos

Martin

quango2k

aircon rad for me please. can you send me a pic so I can confirm its the same and I will take it.

Liam135db

Hi Guys, Thanks for your interest,
Here's the photos of the exhaust, & I'll try to get the wheels up shortly.

Liam135db

As Requested

Liam135db

Hi Martin,
Here's the photos of the wheels, as requested.
the last shots show the bubbling on the finish on one of them, but the others aren't too bad. I have tried to give you closeups of the worst bits so you can make a fair judgement on them.
I've tried to show the tyres as best I can. The tyres have chalk markings to identify the positions they were removed from.
I'm asking almost half the price of the tyres and pretty much throwing the wheels in!
Hope this helps
*Edit* I'm not sure about the Brembos, would've thought so as they were a standard Prodive Wheel at the time, and recommended for PPP*
Liam

si 42

iTrader: (1)

thanks for the pm liam will bell you thursday

Liam135db

according to this: http://natemichals.com/beginners-guide-to-the-wrx/
"Brakes: STI has larger Brembo brake discs and calipers. STI brakes do not fit with some 17” wheels and do not fit on 16” wheels."

Stud pattern appears to be different though if its an STI
"Wheel bolt pattern: WRX: 5x100mm, 2005+ STI: 5×114.3mm

***STI wheels do not fit on a WRX (only 2004 STI wheels will fit WRX).**"
If it's just another WRX shouldn't be an issue as the 18" wheels should clear the Brembos

HTH
Liam

BLOB EYE

iTrader: (10)

Looking for the headlights loom, some plank cut them on our car and fitted hella after market lights, now want to go back to standard so need them.

BLOB EYE

iTrader: (10)

Those wheels are Prodrive FlowForming 7's i.e. PFF7's

they will clear brembos, they are 18" and have an offset that will clear brembos.

as they are fitted to your car (5x100) they will fit the following.

Classic, with right tyres
Bug/Blob Sport, WRX and STi excluding the wide track Blob STi which changed to 5x114
Hawk WRX
Hatch WRX i believe

All STi's onwards of the Blob Wide Track changed to 5x114 stud pattern.

HTH

Eddie.

Liam135db

Thanks for the info on the wheels, Eddie.
Unfortunately we had some late night visitors prowling round the shell(which was on the drive), it forced me to arrange the pickup early this morning as I needed the cert of destruction to get my plate off the car.

I didn't get a chance to pull the looms, sorry.

BLOB EYE

iTrader: (10)

Any chance you could speak to the guys that took it. See if I can grab them before destruction

iain85

Hi will the exhaust and ecu effectively make a standard car the same power output as a factory ppp model?

Liam135db

Hi Iain,
I'm sure there are plenty of people that know better than me on this board, but I believe the PPP is basically the exhaust, remap on the ECU, and hi performance hoses in the Engine bay.
However, I would be wary of trying a straight swap on the ECU as I think it would have to be tuned to your car, along with advanced timing etc.
I don't know if there is anything physically different on the ECU, but that was why I mentioned it.

Not trying to talk myself out of a sale, but I wouldn't want you to damage anything!
The sale is me trying to mitigate the loss of my Scooby not kill someone elses!
Maybe raise it as a thread in itself?

Cheers

iain85

Ok thanks, I will do!

quango2k

the wet mark in the middle..has it has a leak?

Hubby

PM sent

Liam135db

I don't believe there was a leak in the Aircon system when it was running, I'll see if I can google a way to check it though. being in front of the radiator, it could just be ingress through the grill.
I'll see what I can find out.

joey_turbo

iTrader: (26)

Do you have the rear seats? How much?

Liam135db

Sorry Joey_turbo,
I ran out of time, so didn't get rear seats