Breaking classic track project
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2009
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
Breaking classic track project
OFFERS ON EVERYTHING THATS LEFT NOW - I NEED THE SPACE :-)
Well after much thought and pain full conversations with the other half I have decided to break my mica blue classic impreza track project.
most parts are already off the car but the engine will be available in a couple of weeks.
most of these parts have never been run on my car
right so hear goes, prices do not include p & p
Engine - Andrew Williams built EJ20 rear thrust open deck block std bore 92.00 mm
wossner forged pistons
Williams H beam rods
std crank with acl bearings
mocol high pressure oil pump
v4 sti heads
cosmetic 1.6 mm head gasket
aftermarket crank pulley
std cam pulleys with graham goode timing belt kit.
Thhis engine has never been run by me, it was built by Andy Williams and run in on his rally car.
Inlet manifold & ancillaries not included
SOLD
AFP TDO5 20 G - SOLD
FMIC (Bit tatty, belived to be autobahn style) - SOLD
Lateral 550 injectors (1 of the brackets has snapped whilst tring to install) SOLD
Unkown make ceramic coated headers and up pipe - SOLD
another unknown up pipe -SOLD
Japspeed decat down pipe - SOLD
Jasma cat back exhaust (not too loud, few scrapes) £200.00
Inlet Manifold Spacers - SOLD
Inlet Manifold Gaskets - SOLD
Z4 ecu - £40.00
Exceddy stage 1 clutch SOLD
Eclipse blue silicone inlet hose SOLD
Unknown make oil catch can - SOLD
K-sport coilovers - Sold
Front & rear strut braces SOLD
Bronze Rota force 17 x 8j alloy wheels (1 wheels has a small chip in the paint - nothing serious) £550.00
Carbon BGW (Some cracks and marks) - SOLD
Carbon bonnet vent air filer side (slight markings) SOLD
DTM style mirros (not a great fit) SOLD
Turbo Timer SOLD
20 mm hubcentrc wheels spacers with longer studs x 2 - Sold
STD radiator - £25.00
blue silicone top radiator hose - SOLD
Version one engine block with suspected cracked piston £50
Grooved and drilled rear discs (need a rub down) SOLD
Sump guard (no fixings) SOLD
Plus any panels lights or standard trim you need.SHELL SOLD
I can e-mail pics on request.
For quicker response my number is 07739998248
I will probably add more to this once I get round to it.
All parts are based in grimsby
Well after much thought and pain full conversations with the other half I have decided to break my mica blue classic impreza track project.
most parts are already off the car but the engine will be available in a couple of weeks.
most of these parts have never been run on my car
right so hear goes, prices do not include p & p
Engine - Andrew Williams built EJ20 rear thrust open deck block std bore 92.00 mm
wossner forged pistons
Williams H beam rods
std crank with acl bearings
mocol high pressure oil pump
v4 sti heads
cosmetic 1.6 mm head gasket
aftermarket crank pulley
std cam pulleys with graham goode timing belt kit.
Thhis engine has never been run by me, it was built by Andy Williams and run in on his rally car.
Inlet manifold & ancillaries not included
SOLD
AFP TDO5 20 G - SOLD
FMIC (Bit tatty, belived to be autobahn style) - SOLD
Lateral 550 injectors (1 of the brackets has snapped whilst tring to install) SOLD
Unkown make ceramic coated headers and up pipe - SOLD
another unknown up pipe -SOLD
Japspeed decat down pipe - SOLD
Jasma cat back exhaust (not too loud, few scrapes) £200.00
Inlet Manifold Spacers - SOLD
Inlet Manifold Gaskets - SOLD
Z4 ecu - £40.00
Exceddy stage 1 clutch SOLD
Eclipse blue silicone inlet hose SOLD
Unknown make oil catch can - SOLD
K-sport coilovers - Sold
Front & rear strut braces SOLD
Bronze Rota force 17 x 8j alloy wheels (1 wheels has a small chip in the paint - nothing serious) £550.00
Carbon BGW (Some cracks and marks) - SOLD
Carbon bonnet vent air filer side (slight markings) SOLD
DTM style mirros (not a great fit) SOLD
Turbo Timer SOLD
20 mm hubcentrc wheels spacers with longer studs x 2 - Sold
STD radiator - £25.00
blue silicone top radiator hose - SOLD
Version one engine block with suspected cracked piston £50
Grooved and drilled rear discs (need a rub down) SOLD
Sump guard (no fixings) SOLD
Plus any panels lights or standard trim you need.SHELL SOLD
I can e-mail pics on request.
For quicker response my number is 07739998248
I will probably add more to this once I get round to it.
All parts are based in grimsby
Last edited by Stoff1; 30 June 2014 at 02:58 PM.
#6
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2009
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts