BREAKING 450HP CLASSIC 2.5LTR, MD321V, PPG ETC
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2012
Location: Poole
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
BREAKING 450HP CLASSIC 2.5LTR, MD321V, PPG ETC
photo's of all parts available upon request.
Prices as follows
bodywork and interior:
scooby world complete silicon mudflap kit with stainless brackets £20 SOLD
electric folding mirrors and switch £50
chargespeed lower bumper/splitter complete with front bumper SOLD
front wings £45 pair
standard facelift bonnet with scoop and vents SOLD
door cards excellent condition inc all switches/clips, rear seats SOLD
clear/crystal side repeaters SOLD
momo steering wheel inc airbag £30
clear sidelights £15
boot lid + 4x doors with glass, motors etc SOLD
hid headlight kit dipped and main £30 SOLD
full crystal clear headlights lights SOLD
sti rear lights SOLD
sti version 6 spoiler (non genuine and small crack, good paint and good reproduction) SOLD
piaa front fog/driving lights with PIAA dash switch £70
defi gauges (boost, oil p, oil t, water t, fuel p, control box) SOLD
sti clocks (with mph converter, mot and service history show the milage) £50
genuine p1 OZ 18" alloys with brand new vredestein high performance tyres SOLD
MINT front STI 5 seats £150
all other interior exterior parts available pls ask
engine and components, long engine components to be priced after testing LONG ENGINE SOLD, ALL ANCILLARIES STILL AVAILABLE
a/con
walbro fuel pump SOLD
Gems ecu (allows dual mapping and anti lag launch control etc) SOLD
RCM alloy pulley set SOLD
Aps induction elbow £20
Version 5/6 Maf £35
Version 5/6 Map sensor£20
Charge temp sensor £20
3 port boost solenoid SOLD
GT spec/RCM tubular headers including RCM venturi up-pipe SOLD
Virtually brand new scoobyclinic uprated organic clutch documented 1 month old SOLD
APS front mount intercooler including all pipework SOLD
740cc injectors SOLD
aeromotive fpr SOLD
Milltek full 3" exhaust turbo back as new SOLD
MD555 turbo + large 3" turbo inlet pipe+ braided feeds Now Back From TD, has been stripped to component form all parts tested and rebuilt using stepper piston ring. Turbo given full bill of health and is available with or without samco inlet. This is the 450hp model and comes with full inspection stating axial and radial float are spot on etc. SOLD
stainless steel slam panel SOLD
SFS top and bottom silicone rad hoses SOLD
Forge VTA dump valve £40
PPG Straight cut gearset in TY54 box £1,500 less than 10k, reciepts etc SOLD
AP 330/335mm 6pot brakes with bells/ new rotors and pads SOLD
Goodridge front braided brake lines SOLD
suspension
white line anti lift kit SOLD
" rear droplinks £50 SOLD
" front droplinks SOLD
rear adj sway bar £80 SOLD
front anti roll bar £80 SOLD
white line front strut brace £50
space saver wheel (unused) £5
stereo
2x Kenwood KFC-6907 200w 6x9's excellent condition SOLD
30K of receipt for engine, gearbox build work
PRICES DO NOT INCLUDE POSTAGE
PLENTY MORE TO BE LISTED YET, UPDATES AS THE PARTS ARE REMOVED
ANY QUESTIONS PLEASE ASK FOR THOSE THAT ARE ON FB 36 PHOTOS OF THE CAR HAVE BEEN UPLOADED TO
http://www.facebook.com/HaynesPerformanceBreakers
Last edited by Marky@HPB; 02 July 2012 at 06:52 PM. Reason: UPDATE
Trending Topics
#9
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2012
Location: Poole
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Lalu, i will pm when back from work, Jaygsi sorry prices do not include postage, b3mwe the air filter is a cheap generic ebay type £10 and the intercooler is an APS with silicon pipe kit £400, billy i will pm when back from work both your parts will be put aside today, banny i will do my best to find out what model the intercooler is today. I thought they made two core sizes and this is the smaller one hence price.
Many thanks guys
Mark
Many thanks guys
Mark
#14
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2012
Location: Poole
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
X70cky, i will have them off tomorrow clean and take pics and post them up for you to have a look. The other breakers are listing these at the same price and some even want £170. However once they are off, if they seem overly tired i will reduce the price to suit
#16
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2012
Location: Poole
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Banny, the APS FMIC is identical to this one.
https://www.scoobynet.com/subaru-par...ont-mount.html
Still not sure exactly what model tho. I have the receipt for £860 so am thinking it is a 525
https://www.scoobynet.com/subaru-par...ont-mount.html
Still not sure exactly what model tho. I have the receipt for £860 so am thinking it is a 525
#19
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2012
Location: Poole
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Hi X70cky, sorry i gave you incorrect info on compatibility for the RCM pulley set. The power steering pulley will not fit a newage car. The classics are bolt on and the newage are pressed on. Sorry about that.The next car i will be breaking will be a newage sti prodrive, if it has decent pulley's i will pm you.
Regards
Mark
Regards
Mark
#21
Scooby Regular
iTrader: (11)
Hi X70cky, sorry i gave you incorrect info on compatibility for the RCM pulley set. The power steering pulley will not fit a newage car. The classics are bolt on and the newage are pressed on. Sorry about that.The next car i will be breaking will be a newage sti prodrive, if it has decent pulley's i will pm you.
Regards
Mark
Regards
Mark
Ok mate no bother I wasn't sure my self tbh.....I've added you guys on facebook also so will keep a look out mark cheers any way
Lee
#22
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2012
Location: Poole
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Jaygsi, i have noticed that all the traders use different ways of listing parts. Some don't even list prices. I have just started out as a trader and would like to make everyone dealing with me as comfortable as possible. The way i list parts may change as time goes on. For now i would just like to sell parts at reasonable prices to keep a roof over my head m8. I will update the parts list to say not inc postage.
#23
Scooby Senior
iTrader: (68)
Banny, the APS FMIC is identical to this one.
https://www.scoobynet.com/subaru-par...ont-mount.html
Still not sure exactly what model tho. I have the receipt for £860 so am thinking it is a 525
https://www.scoobynet.com/subaru-par...ont-mount.html
Still not sure exactly what model tho. I have the receipt for £860 so am thinking it is a 525
#27
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2012
Location: Poole
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
daza1974, no m8 it is an external vta dv. It will not fit directly to a tmic without a fitting kit and also not £50 posted. It is £124 new and is in excellent cond. £55 posted
Last edited by Marky@HPB; 15 June 2012 at 08:27 PM.
#28
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2012
Location: Poole
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
A couple of new pics and update on headers/downpipe
GT spec/ RCM headers with Venturi up-pipe £350
Defi twin gauge pod a-pillar £20
Defi, triple centre gauge pod
SFS upper and lower rad hoses
Milltek 3" downpipe £90
Prodrive wheels and all other parts update Monday
GT spec/ RCM headers with Venturi up-pipe £350
Defi twin gauge pod a-pillar £20
Defi, triple centre gauge pod
SFS upper and lower rad hoses
Milltek 3" downpipe £90
Prodrive wheels and all other parts update Monday
#29
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: May 2012
Location: Poole
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Few more pics
Scooby Clinic Extreme clutch 2 months old and less than 2k covered £200 posted
Samco turbo inlet to suit MD321/MD555
APS 525 FMIC complete kit inc all pipework,clips etc. Excellent condition but could do with a lick of paint £400
RCM pulley set faded colour £120
Milltek 3" back box excellent condition £150
Scooby Clinic Extreme clutch 2 months old and less than 2k covered £200 posted
Samco turbo inlet to suit MD321/MD555
APS 525 FMIC complete kit inc all pipework,clips etc. Excellent condition but could do with a lick of paint £400
RCM pulley set faded colour £120
Milltek 3" back box excellent condition £150