Official ESC RC Helicopter Thread
#1
Official ESC RC Helicopter Thread
Okay guys heres our very own thread to talk everything from swashplates to boomstrikes, mixes and gyros.
Some may know ive gone the whole hog and bought a Freya 90 X-Spec 3D heli.
Whist practicing to fly this im using my little inddor blade CX2 and Phoenix RC flight sim.
Heres a Screenshot of me flying a Synergy N9 Team in Phoenix
This screenshot really does the sim no justice at all, it really is incredibly accurate and silky smooth running
Some may know ive gone the whole hog and bought a Freya 90 X-Spec 3D heli.
Whist practicing to fly this im using my little inddor blade CX2 and Phoenix RC flight sim.
Heres a Screenshot of me flying a Synergy N9 Team in Phoenix
This screenshot really does the sim no justice at all, it really is incredibly accurate and silky smooth running
#3
Scooby Regular
Join Date: Feb 2006
Location: Going further than the station and back !!! ZZZZZZZZZzzzzzzzzzzzz
Posts: 11,097
Likes: 0
Received 0 Likes
on
0 Posts
oh my god, how real does that look!!!!
i might sell my Raptor as i don't really have time to use it now, what with the nitro cars and the kite flying!!!!!!
hopefully someone can get good use out of it and fly it properly, unlike me
although, once i clap eyes on her again, i might have to take her out for another blat and get the cobwebs out the Irvine .39 !!!!
its just so much stuff to carry about!!!!!!
dazza (kites and cars)
i might sell my Raptor as i don't really have time to use it now, what with the nitro cars and the kite flying!!!!!!
hopefully someone can get good use out of it and fly it properly, unlike me
although, once i clap eyes on her again, i might have to take her out for another blat and get the cobwebs out the Irvine .39 !!!!
its just so much stuff to carry about!!!!!!
dazza (kites and cars)
#4
My Heli i got cheap from a mate who 3d's mate.
Ive got
Hirobo Freya X-Spec (Vastly differenet to a normal Freya)
OS91 C-Spec engine
full ally head
Futaba 9552 servos on everything
Futaba GY-601 Gyro- servo
Futaba 149DP receiver
Rev Lock 10 Guv
SAB 690 carbon mains
SAB tails
Also got some spares,
another full carbon stacked airfram,
canopy
boom
aluminium ccpm rotor head
main shaft
loads and loads of other bits i can remember
Added up this little lot is nearly £4k
I got it for a grand.
Ive also bought some other bits like Futaba FF9 C Super, dynatron starter and robbie bearing wand.
#5
BTW mate.. if you want the best advise on helis, go to either Colin Bliss in Maldon or chat to Bob & Nick @ Skyline Models.
99% of my stuff i buy from Skyline Skyline Models Limited Remote Control Model Helicopters - Futaba - Thunder Tiger- Align
99% of my stuff i buy from Skyline Skyline Models Limited Remote Control Model Helicopters - Futaba - Thunder Tiger- Align
#6
That screenshot looks so real!
Been flying my blade quite a bit recently.
Getting quite good with it now......crashes are getting quite rare now even flying it indoors.
Managing to land it on small table tops, top of the TV, kitchen worktops, fly through doors.
Would love to have a go in a sports hall or something similar.
Been flying my blade quite a bit recently.
Getting quite good with it now......crashes are getting quite rare now even flying it indoors.
Managing to land it on small table tops, top of the TV, kitchen worktops, fly through doors.
Would love to have a go in a sports hall or something similar.
Trending Topics
#10
Scooby Regular
Join Date: Aug 2005
Location: Southend
Posts: 3,315
Likes: 0
Received 0 Likes
on
0 Posts
BTW mate.. if you want the best advise on helis, go to either Colin Bliss in Maldon or chat to Bob & Nick @ Skyline Models.
99% of my stuff i buy from Skyline Skyline Models Limited Remote Control Model Helicopters - Futaba - Thunder Tiger- Align
99% of my stuff i buy from Skyline Skyline Models Limited Remote Control Model Helicopters - Futaba - Thunder Tiger- Align
#12
Scooby Regular
Join Date: Aug 2005
Location: Southend
Posts: 3,315
Likes: 0
Received 0 Likes
on
0 Posts
i am flying the cz2 confidently around the house and outside
i can fly it front on now......
Paul gave me his hummingbird v3, which i'm going to fly at the weekend, when i get a decent handset and receiver.
Im then looking at a min 30 nitro, not a 90 as thats to much money at the moment.
i can fly it front on now......
Paul gave me his hummingbird v3, which i'm going to fly at the weekend, when i get a decent handset and receiver.
Im then looking at a min 30 nitro, not a 90 as thats to much money at the moment.
#13
Scooby Regular
i am flying the cz2 confidently around the house and outside
i can fly it front on now......
Paul gave me his hummingbird v3, which i'm going to fly at the weekend, when i get a decent handset and receiver.
Im then looking at a min 30 nitro, not a 90 as thats to much money at the moment.
i can fly it front on now......
Paul gave me his hummingbird v3, which i'm going to fly at the weekend, when i get a decent handset and receiver.
Im then looking at a min 30 nitro, not a 90 as thats to much money at the moment.
Try and get all your basics absolutely nailed with the CX2 first.. sounds like youre doing well. Although be prepared that the cyclic response on a single rotor heli is massively different to that of the CX2.
TBH ive now decided that i'll use the CX2 just to perfect my orientation as opposed to my flying skils as the 2 helis act so differently.
A 30 will be pretty cool, but a bigger heli will hold its own in the air much greater. Id just go for the best you can afford and take it very VERY slowly.
Im not even going to think about flying the X-Spec for a good while yet until im 150% nailed on my manoeuvres.
I know the sim is no replacement for the real thing however if im almost perfect on that then i have the best possible chance with the real thing.
Lets face it.. a 90 size heli wont hurt someone.. it will kill them.
Nice to have someone else wanting to do this too
#14
Scooby Regular
Join Date: Aug 2005
Location: Southend
Posts: 3,315
Likes: 0
Received 0 Likes
on
0 Posts
I have not had much luck with R/C trucks so i thought i could at least fly something instead of kneeling down make it look like i'm praying constantly
Can't do with sore knees at my age lol.
I am really glad your into the helli's mate.....its just another world when you start to lkearn to fly them....Whats next I say
Maybes go onto small nitro planes, then after a few years go for the Jets .
I have taken your advice about the bigger the helli, the more stable it would be in the air So a 30 is out of the window.
May go for a 50 i'm sure i saw that size
give it a couple of months mate and we may be buzzing the ESC R/C chaps around the field at burnham power station
#15
I have not had much luck with R/C trucks so i thought i could at least fly something instead of kneeling down make it look like i'm praying constantly
Can't do with sore knees at my age lol.
I am really glad your into the helli's mate.....its just another world when you start to lkearn to fly them....Whats next I say
Maybes go onto small nitro planes, then after a few years go for the Jets .
I have taken your advice about the bigger the helli, the more stable it would be in the air So a 30 is out of the window.
May go for a 50 i'm sure i saw that size
give it a couple of months mate and we may be buzzing the ESC R/C chaps around the field at burnham power station
Another thing is trying to go for a known brand heli such as maybe a Thundertiger, Align or Hirobo. The inevitable will happen and you will need spares so its nice to know that these spares are readily available.
A bigger heli will cope with wind better too.
Also if you plan on upgrading helis in the future, try and by stuff like starters and radio, gyros etc that you wont need to replace come the time when you make the jump.
For example you'll need to buy a dynatron starter for a 90 heli and nothing else will happily start it. Also buy the best wand you can as these also wear out quickly.
IMO id buy the radio and servos separately as the ones that come with the radio arnt really up to the job of the cyclic controls on the swash.
These are all things ive picked up on recently that will try and stop you from spending your money twice.
Did you notice that Bradwell even has its own "H"!!!
Our very own pad
#16
Scooby Regular
Join Date: Aug 2005
Location: Southend
Posts: 3,315
Likes: 0
Received 0 Likes
on
0 Posts
Sounds cool mate, yeah a 50 is available no problem.
Another thing is trying to go for a known brand heli such as maybe a Thundertiger, Align or Hirobo. The inevitable will happen and you will need spares so its nice to know that these spares are readily available.
A bigger heli will cope with wind better too.
Also if you plan on upgrading helis in the future, try and by stuff like starters and radio, gyros etc that you wont need to replace come the time when you make the jump.
For example you'll need to buy a dynatron starter for a 90 heli and nothing else will happily start it. Also buy the best wand you can as these also wear out quickly.
IMO id buy the radio and servos separately as the ones that come with the radio arnt really up to the job of the cyclic controls on the swash.
These are all things ive picked up on recently that will try and stop you from spending your money twice.
Did you notice that Bradwell even has its own "H"!!!
Our very own pad
Another thing is trying to go for a known brand heli such as maybe a Thundertiger, Align or Hirobo. The inevitable will happen and you will need spares so its nice to know that these spares are readily available.
A bigger heli will cope with wind better too.
Also if you plan on upgrading helis in the future, try and by stuff like starters and radio, gyros etc that you wont need to replace come the time when you make the jump.
For example you'll need to buy a dynatron starter for a 90 heli and nothing else will happily start it. Also buy the best wand you can as these also wear out quickly.
IMO id buy the radio and servos separately as the ones that come with the radio arnt really up to the job of the cyclic controls on the swash.
These are all things ive picked up on recently that will try and stop you from spending your money twice.
Did you notice that Bradwell even has its own "H"!!!
Our very own pad
Yes i did notice the helli pad, i was going to take a shovel and some weed killer and clean it up a little for my helli
#17
Scooby Regular
#18
Scooby Regular
Join Date: Aug 2005
Location: Southend
Posts: 3,315
Likes: 0
Received 0 Likes
on
0 Posts
#19
John,
This might interest you
eBay.co.uk: Immaculate Hirobo SST Freya/ YS80/ Hatori/ RTF (item 290127269584 end time 16-Jun-07 19:30:09 BST)
This might interest you
eBay.co.uk: Immaculate Hirobo SST Freya/ YS80/ Hatori/ RTF (item 290127269584 end time 16-Jun-07 19:30:09 BST)
#20
911 C4 pilot
iTrader: (7)
Join Date: Jan 2007
Location: In an Air Cooled Porsche
Posts: 3,578
Likes: 0
Received 0 Likes
on
0 Posts
I've got a Freya Eagle 60 - OS 71 engine, carbon blades, but stock apart from that. had a Caliber 30 before that & i use a hoverfly to practice on indoors & realflight G2, although that screen shoot looks amazing. not flown much this year as I'm learning to fly real planes
#21
Scooby Regular
Join Date: Aug 2005
Location: Southend
Posts: 3,315
Likes: 0
Received 0 Likes
on
0 Posts
John,
This might interest you
eBay.co.uk: Immaculate Hirobo SST Freya/ YS80/ Hatori/ RTF (item 290127269584 end time 16-Jun-07 19:30:09 BST)
This might interest you
eBay.co.uk: Immaculate Hirobo SST Freya/ YS80/ Hatori/ RTF (item 290127269584 end time 16-Jun-07 19:30:09 BST)
but i have now been put off from buying from the USA, cos of import duty and tax
#25
Well the bird has landed...
Just bought the X-Spec home...
Spent the evening with Dan setting things up.. only a few more bits to do. Its having to stay downstairs on the dining room table at the moment as its just too big to put anywhere else.
Unfortunately i have no cam at the moment but will get pics up soon.
Im also fixing a friends T-Maxx at the moment and put them side by side.
Poor little monster truck
Just bought the X-Spec home...
Spent the evening with Dan setting things up.. only a few more bits to do. Its having to stay downstairs on the dining room table at the moment as its just too big to put anywhere else.
Unfortunately i have no cam at the moment but will get pics up soon.
Im also fixing a friends T-Maxx at the moment and put them side by side.
Poor little monster truck
Last edited by frayz; 23 June 2007 at 10:10 PM.
#28
Scooby Regular
Join Date: Aug 2006
Location: ESSEX ...BORN AND BRED PETROL HEAD....................... MANS BEST FRIEND IS A ENGLISH BULL TERRIER
Posts: 1,666
Likes: 0
Received 0 Likes
on
0 Posts
IF ANYONES INTERESTED IVE GOT A KYSHO NEXUS 30 UP FOR GRABS
2 X TRANSMITTERS 1 X 6 CHNL 1 X 5 CHANL WOULD ALSO RUN CARS,BOATS,PLANES,TRUCKS ASWELL
1X VINTAGE HELLI
1X STARTER
AND GYROS,SERVOS,AND OTHER BITS AND PIECES WILL ADD MORE DETAILS AND PHOTOS TOMORROW IF ANYONE INTERESTED IN ESSEX SO PIC UP WELCOME
KIP
2 X TRANSMITTERS 1 X 6 CHNL 1 X 5 CHANL WOULD ALSO RUN CARS,BOATS,PLANES,TRUCKS ASWELL
1X VINTAGE HELLI
1X STARTER
AND GYROS,SERVOS,AND OTHER BITS AND PIECES WILL ADD MORE DETAILS AND PHOTOS TOMORROW IF ANYONE INTERESTED IN ESSEX SO PIC UP WELCOME
KIP
Last edited by KIPS; 23 June 2007 at 11:28 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM