Running multiple maps on the stock ecu 2004 wrx
16 December 2013, 10:58 AM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2012
Location: New Zealand
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Running multiple maps on the stock ecu 2004 wrx
Hey all is there some way to run two unique ecu maps on a stock 2004 2.0ltr JDM wrx?
Basically I want one map tuned for max performance on 98 octance and then a second map tuned for less boost, igition, fueling and tuned for 95 octane.
Ideally I would like to be able to swap between the two maps with the press of a button or similar
What are my options as the tuners here in NZ seem to use ECUtek for all their subaru tuning,
Can it be done? what is required?
Basically I want one map tuned for max performance on 98 octance and then a second map tuned for less boost, igition, fueling and tuned for 95 octane.
Ideally I would like to be able to swap between the two maps with the press of a button or similar
What are my options as the tuners here in NZ seem to use ECUtek for all their subaru tuning,
Can it be done? what is required?
17 December 2013, 12:05 AM
#2
Hi there
You can have multiple fuel maps on the JDM WRX,not sure if EcuTek MegaROM is supported for yours ECU,but this should confirm yours tuner
If not then only option is map via Open Source and CarBerry ROM
Via both you can have two fuel maps etc.
Jura
You can have multiple fuel maps on the JDM WRX,not sure if EcuTek MegaROM is supported for yours ECU,but this should confirm yours tuner
If not then only option is map via Open Source and CarBerry ROM
Via both you can have two fuel maps etc.
Jura
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM
