jawiimpreza

iTrader: (1)

hi am looking about getting my impreza uk turbo wagon s reg and was Registration Date: 04/01/1999,,,is my ecu map able or will i need to change it,,,,the car has a ninja s/s exhaust from down pipe back and a k&n filter,,runs sweet for a car with 173thou on clock feels better then my bugeye wrx with 97thou...soon will be fitting a fmic so i should be looking to get it remapped...also wats the best map as i dont want it to be crazy,,i just want it to be safe, any info would be great ,,,thanks

Turbotits

iTrader: (2)

Depends on the model year of car rather than registration date. If its a 97/98 car then its an esl board. If its a 99/2000 model then can be done with ecutek.

Have a look at the ecu part number for a difinitive answer

Jolly Green Monster

iTrader: (4)

If the coilpack is offset to passenger side it is a 99. If in the centre it is a 98

Simon

jawiimpreza

iTrader: (1)

looks to be dead centre..cheers

Bob Rawle

Can you check the aluminium vin plate on the nearside strut top for the model number and post that as the date of reg would make it difficult for the car to be a MY98, it would have had to have been sat somewhere for quite a period. MY99 vehicles were from September 1998 to august 1999. MY98 were from september 1997 to august 1998. Also look at the engine code, if its EJ205???? or EJ207???? then its a MY99 car and the ecu is directly mappable.

bob

jawiimpreza

iTrader: (1)

av looked on vin plate and its j20G has a 6 in other numbers

stedee

iTrader: (4)

as simon said , if coils in the middle 99.9% its a v3/4 which is 97/98 so you will need an esl board

jawiimpreza

iTrader: (1)

cheers