remap gains for 2005 sti ppp with small mods
#1
Scooby Regular
Thread Starter
remap gains for 2005 sti ppp with small mods
Hi all, iv had my impreza sti ppp 4 months now and was wondering what sort of gains could be expected with an ecu remap. It has a green cotton panel filter, forge dump valve and 3 inch exhaust. Any info would be appriciated. Thanks, richy
#3
Scooby Regular
Thread Starter
Is it prodrive? I dont really wanna decat mine as want to mot it without changing back yearly. Although i have been looking at fmic. As with most things, im guessing the quality increases with price?
#7
Fully mobile Subaru Impreza and Forester ecu tuning & remapping specialist. Based in Dorset/Hampshire border but travels to wherever within the UK Tel: 07540 185754
If your on FB here's a link to his mapping session on Friday
https://www.facebook.com/events/220354364766610/
Regards
Rob
If your on FB here's a link to his mapping session on Friday
https://www.facebook.com/events/220354364766610/
Regards
Rob
Trending Topics
#9
Scooby Regular
iTrader: (1)
Andy Forrest remapped my old 05 STI PPP
It made 337 with similar torque
But in ts not just the power difference.
Its quite simply a better driving car at the end of the day with the extra torque available.
Plus it will give you a much nicer power band to work with.
After mapping, mine pulled very strongly from approx 2.5K right up to 6.5K with 1.4bar boost - I think full boost was available from 2.6K
It then tapered down to 1bar at 7K.
I see no point taking these cars beyond 6/6.5K anyway, I find it best to simply grab another gear
It made 337 with similar torque
But in ts not just the power difference.
Its quite simply a better driving car at the end of the day with the extra torque available.
Plus it will give you a much nicer power band to work with.
After mapping, mine pulled very strongly from approx 2.5K right up to 6.5K with 1.4bar boost - I think full boost was available from 2.6K
It then tapered down to 1bar at 7K.
I see no point taking these cars beyond 6/6.5K anyway, I find it best to simply grab another gear
#10
Scooby Regular
Join Date: Jul 2005
Location: West Midlands
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
You should see 330 to 340 bhp with the Prodrive CAT
Not sure id fit a FMIC though as the top mount should be good for around 400bhp
I use Tacktive Solutions there in Melton Mowbray for my tuning Richard Bulmer as mapped my 05 STI on a number of occasions you will find them very professional and Rich is one of the top mappers in Europe well worth a visit this guys really do look after your car.
Not sure id fit a FMIC though as the top mount should be good for around 400bhp
I use Tacktive Solutions there in Melton Mowbray for my tuning Richard Bulmer as mapped my 05 STI on a number of occasions you will find them very professional and Rich is one of the top mappers in Europe well worth a visit this guys really do look after your car.
#11
Former Sponsor
iTrader: (3)
You should see 330 to 340 bhp with the Prodrive CAT
Not sure id fit a FMIC though as the top mount should be good for around 400bhp
I use Tacktive Solutions there in Melton Mowbray for my tuning Richard Bulmer as mapped my 05 STI on a number of occasions you will find them very professional and Rich is one of the top mappers in Europe well worth a visit this guys really do look after your car.
Not sure id fit a FMIC though as the top mount should be good for around 400bhp
I use Tacktive Solutions there in Melton Mowbray for my tuning Richard Bulmer as mapped my 05 STI on a number of occasions you will find them very professional and Rich is one of the top mappers in Europe well worth a visit this guys really do look after your car.
Sure it is possible to get 400bhp with a tmic but why hold it back when a decent fmic will improve power and safety.
I wouldnt necessarily do a fmic for the OP though, just a decent remap will see that hit 340 ish bhp with very minimal work or cost.
#12
Scooby Regular
Thread Starter
Thanks for all the replies guys. Has it mapped by Duncan last Friday. He got 321bhp and 316 ftlb of torque. Due to me living 20 miles from the nearest shell garage, I've been filing up with esso super unleaded. He said had I been using vpower I could of had 330bhp plus. Didn't realise it made that much difference. I'll know for next time tho haha. Looking to go up the upgraded turbo route now
#13
You will have power gains with a fmic over a tmic right from 300bhp upwards. For example if you got 330bhp with a tmic, you will probably see 350 with a fmic; 350 with tmic => 375 with fmic; 400 with tmic => 440 with fmic.
Sure it is possible to get 400bhp with a tmic but why hold it back when a decent fmic will improve power and safety.
I wouldnt necessarily do a fmic for the OP though, just a decent remap will see that hit 340 ish bhp with very minimal work or cost.
Sure it is possible to get 400bhp with a tmic but why hold it back when a decent fmic will improve power and safety.
I wouldnt necessarily do a fmic for the OP though, just a decent remap will see that hit 340 ish bhp with very minimal work or cost.
Looks like a FMIC and tweak is my next present off Mrs C then.
#14
Scooby Newbie
Join Date: Oct 2012
Location: Warrington
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=richyprodrive1988;10958596]Thanks for all the replies guys. Has it mapped by Duncan last Friday. He got 321bhp and 316 ftlb of torque. Due to me living 20 miles from the nearest shell garage, I've been filing up with esso super unleaded. He said had I been using vpower I could of had 330bhp plus. Didn't realise it made that much difference. I'll know for next time tho haha. Looking to go up the upgraded turbo route now[/QUOTE
Hi..I've got the same 2005 sti ppp was thinking of a remap myself how does the car drive with the remap?
Thanks
Hi..I've got the same 2005 sti ppp was thinking of a remap myself how does the car drive with the remap?
Thanks
#15
Would it be possible (and reasonable) to remap a standard 2005 STI (non PPP) without changing the downpipe or exhaust? I don't want extra noise or MOT issues but would like plenty more torque and low range response.
#16
Ecu Specialist
Yes is the answer, the top end will be gated but you should still be able to have good mid range torque, you will need to uprate the fuel pump though.
cheers
bob
cheers
bob
Thread
Thread Starter
Forum
Replies
Last Post
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM