Who to go to for map north west?
#1
Scooby Newbie
Thread Starter
Join Date: Jan 2018
Location: Manchester England
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Who to go to for map north west?
Sorted an exhaust for the sti hatch next mission is to get it booked in for a decent map, not bothered about figures or gaining loads of bhp more just a map to help reliability. I know a lot of the big ones may be booked up for a bit so want to get it booked in. Don’t mind travelling just not too far. Who do you guys reccomend and any I should stay away from? Thank you
#3
Scooby Newbie
Im in the same situation mate. Been trying to get hold of andy forrest but no reply but both cams performance and as performance can do it cheaper and are a bit closer. Not sure who to go with myself
#4
Scooby Regular
I also recommend Anthony through Brian at cams performance
The only mapper who I can trust to do a good job and who I would allow to work/tune my jdm impreza,reachable even if busy , takes the time to explain if need be,
Down to earth top man
Also has his own premises of business
The only mapper who I can trust to do a good job and who I would allow to work/tune my jdm impreza,reachable even if busy , takes the time to explain if need be,
Down to earth top man
Also has his own premises of business
Trending Topics
#8
Scooby Newbie
Join Date: Apr 2018
Location: Manchester
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
#9
Scooby Newbie
On the way home though it started to overboost and then **** itself cruising down he motorway in 5th at 80mph and black smoke poured out the back of it and had oil blowing out of oil cap, and all the breather hoses were drenched in oil. Now its rebuild time. Was only a matter of time from what i hear with these **** pistons so not blaming ADE
#10
Scooby Regular
i got mine remapped by ADE through cams. Had the air pump removed for catch cabs, the vf48 installed, 3" downpipe to suit rest of system, walbro 255, and the 3 pot fitted at same time. Labour was really reasonable and the guys at cams were really helpful.
On the way home though it started to overboost and then **** itself cruising down he motorway in 5th at 80mph and black smoke poured out the back of it and had oil blowing out of oil cap, and all the breather hoses were drenched in oil. Now its rebuild time. Was only a matter of time from what i hear with these **** pistons so not blaming ADE
On the way home though it started to overboost and then **** itself cruising down he motorway in 5th at 80mph and black smoke poured out the back of it and had oil blowing out of oil cap, and all the breather hoses were drenched in oil. Now its rebuild time. Was only a matter of time from what i hear with these **** pistons so not blaming ADE
Thread
Thread Starter
Forum
Replies
Last Post
rs250gpracer
General Technical
8
03 February 2008 01:40 AM
Up_North
Wheels, Tyres & Brakes
7
14 August 2002 10:07 PM