yash

iTrader: (1)

Hello guys

I am living down in mauritius and some reason my sti v4 obd doesnot correspond to the uk version. I ordered a ESL ecu which came on an 8S ecu but I cant make connection between the 8s and the OBD. Can someone please let me know which pin number on the ECU goes to which pin number on the OBD port. I would be super grateful. Thanks alot.

ossett2k2

iTrader: (9)

It uses the ssm lead for your car(the yellow plug under the steering column.
The OBD2 port is pretty redundant on your V4

ossett2k2

iTrader: (9)

Apologies,I've just checked the ESL site and it does say v4 is obd.

My old uk2000 with the 8s ecu would never connect to a diagnostics using obd so I assumed ESL would use the ssm.

yash

iTrader: (1)

Thanks for the reply but can find the ssm and I only have the Obd cable for the ESL ecu. Thanks.

ossett2k2

iTrader: (9)

Is the obd cable an ESL one?
Did the driver install correctly?
Is the software working ok?

yash

iTrader: (1)

yes all ok software side and it is an original obd 2 cable

As I said above. the wiring to the obd port was not good.

I have put the pins in place but still getting an error.

I would be grateful if someone would give me the obd pin out for an 8s ecu so that I can check if everything is corrected.

I noticed that the b135 pin 2 ( starter switch ) is interconnected with b135 pin 5 ( select monitor ) are they supposed to be inter connected ?