Fuel pump quickie!
#2
The different plug is for different models so if yours fits dont change it. The rubber is just to make it a snugger fit i think but i didnt use it. Cable tie it to the cage.
#3
Scooby Regular
Thread Starter
#4
Scooby Regular
iTrader: (1)
Did this at the weekend.
No need to change the plug - standard one fits fine.
Using either the foam sleave or rubber cap will mean that the pump won't fit to the body. Just cable tie it without them.
The pump outlet meets the inlet pipe with about 3 mm to spare. So you only need to cut the rubber hose down to 2 inches and then fit the banjo bolts.
No need to change the plug - standard one fits fine.
Using either the foam sleave or rubber cap will mean that the pump won't fit to the body. Just cable tie it without them.
The pump outlet meets the inlet pipe with about 3 mm to spare. So you only need to cut the rubber hose down to 2 inches and then fit the banjo bolts.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM