Prodrive ecu for my00 classic
#1
Scooby Newbie
Thread Starter
iTrader: (1)
Join Date: May 2015
Location: Belgium
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Prodrive ecu for my00 classic
Can someone tell me if a prodrive ecu with numbers SP 1001056110 A18-000 D1X coming from a UK '99 RB5 will fit my car. A LHD dutch my00 impreza gt turbo with original Y6 22611AE782 A18-000 D3K.
The reason for asking is that the owner told that the D1X ecu only is an upgrade for uk model MY99 to MY00 which is either E3 or Y7 code. And I don't know how that's related to my Y6.
And before someone asks, ecutek or something like that is not an option.
The reason for asking is that the owner told that the D1X ecu only is an upgrade for uk model MY99 to MY00 which is either E3 or Y7 code. And I don't know how that's related to my Y6.
And before someone asks, ecutek or something like that is not an option.
#4
Scooby Regular
iTrader: (46)
Right the Prodrive ecu your describing is like the one below? If so it will not fit yours.
http://www.ebay.co.uk/itm/SUBARU-IMP...item1c5264e438
You would need the grey plug Prodrive ECU.
http://www.ebay.co.uk/itm/SUBARU-IMP...item1c5264e438
You would need the grey plug Prodrive ECU.
#7
Scooby Newbie
Thread Starter
iTrader: (1)
Join Date: May 2015
Location: Belgium
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
You don't have to search so far:
https://www.scoobynet.com/subaru-par...r-classic.html
This is what I think is the correct replacement for my Y6 ecu.
https://www.scoobynet.com/subaru-par...r-classic.html
This is what I think is the correct replacement for my Y6 ecu.
Trending Topics
#17
Scooby Newbie
Thread Starter
iTrader: (1)
Join Date: May 2015
Location: Belgium
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I see that max. turboboost went from 0.8bar with the y6 ecu to 1.1 now. Power is more lineair from 4 to 6k rpm. Under 3k rpm it struggles more. But with the mods that should go better.
I also replaced the black plastic y pipe with an sti version and a prodrive elbow.
Ordered an Itg panel filter
Only thing I can't find is the prodrive/wr sport exhaust (backbox and middle section)
So if someone knows something for sale, you can pm me
I also replaced the black plastic y pipe with an sti version and a prodrive elbow.
Ordered an Itg panel filter
Only thing I can't find is the prodrive/wr sport exhaust (backbox and middle section)
So if someone knows something for sale, you can pm me
#18
Scooby Regular
Join Date: May 2014
Location: Barcelona
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
The exhaust you can use another and runs ok.. I'm running with a cobra sport cat back and center non resonated section and car push well . K n panel filter snd silicone intercooler hoses
I'm happy but cobra exhaust is too loud
Cheers
I'm happy but cobra exhaust is too loud
Cheers
#24
Scooby Regular
iTrader: (1)
Mate there was no centre sport cat with '99 ppp. Its mapped for the standard catted downpipe, a decat centre section, and prodrive backbox. Not sure where you're getting your info from. They don't exist, either used or aftermarket, because they're unnecessary, the cat in the downpipe does the job for emissions.
Thread
Thread Starter
Forum
Replies
Last Post
aaron_ions
General Technical
17
03 November 2021 11:07 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
aaron_ions
General Technical
1
17 September 2015 10:42 AM