danprec

hi
i need help to find connctor F74 in my car. i have problem with TGV Valve actuator, theri is one cable fault, i paste picture form subaru servce manual and i mark red box connector F74. i have continuity btwin ECU (pin10) and actuator (pin1) but fault continuity btwin ECU (pin11) and actuator (pin2) i check connector at ECU all fine, i check connector F61 all fine so the fault must be at connector F74, but i cant find where is , so pls help if somebody know where is

thanks

Don Clark

F74/B200 is a connection between the Front wiring harness and the Bulkhead Wiring Harness(in compartment).

Both for RHD............

Don Clark

Looking at my DTC info (for 2005 WRX) F74/B200 is bypassed for RHD model................

danprec

cool , thanks guys for help...
@Don Clark i have just WRX its not STi so i think i have that connector because btwin acutator and F61 connection is fine but now continuity btwin F61 and ECU, but i double check on weekend , thanks for infos again that very helpfull for me

PS.
i have fault code 2011 tumble generated valve circut open (bank 2) so i think i have F74 but i check at weekend.

Don Clark

Which WRX do you have a MY05 Blobeye or a MY06 Hawkeye ???

Suspect it's a Hawkeye as P2011 not used by Subaru until 2006 Model.......


You will have an F74/B200 connector but what you are trying to trace may not be wired through it...........

danprec

there is Blobeye 2005 maybe ECU is from Hawkeye i dont know...

Don Clark

Manual for European 04/05 Impreza (in English) available here.........

http://subaru-car.ru/manuals/impreza/2004/

Just download all the PDF links

danprec

Thank You for share

danprec

Don Clark thanks, i check oday and u right is bypass i find problem, pin 8 in F61 was broken , i fixed and work now, thanks

Don Clark