Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

Rattling noise from engine

Thread Tools
 
Search this Thread
 
Old May 1, 2002 | 12:11 PM
  #1  
Lozza's Avatar
Lozza
Thread Starter
Scooby Regular
 
Joined: Aug 2002
Posts: 1,473
Likes: 0
Post

Have noticed over last few days when I start my car up and when it is at 1500 revs (sometimes) and 3500 revs there is a rattling sound from my engine. It sounds like when your exhaust is loose and rattles.

Have had a new downpipe put on recently and someone has told me that it could be my heat shield on my turbo which has come loose. Is this right or could it be more serious gulp.

Any advice would be extremely welcome.

Thanks
Lozza

Reply
Old May 1, 2002 | 12:22 PM
  #2  
David_Wallis's Avatar
David_Wallis
Scooby Regular
 
Joined: Nov 2001
Posts: 15,239
Likes: 1
From: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Post

it will be one of the heatshields...

David
Reply
Old May 1, 2002 | 08:50 PM
  #3  
JohnD's Avatar
JohnD
Scooby Regular
iTrader: (5)
 
Joined: Apr 2000
Posts: 6,252
Likes: 1
From: Havering, Essex
Exclamation

Also make sure the downpipe to g/box support bracket is ok
JohnD
Reply
Old May 2, 2002 | 01:33 AM
  #4  
teknopete's Avatar
teknopete
Scooby Regular
 
Joined: Mar 2000
Posts: 2,323
Likes: 0
From: Tayside
Cool

Lozza,

Odds on its the LHS heat shield. If it is jack it up and check the bolts r tight (cures that most of the time)
Alternatively and 1 I`m experiencing myself jnow is the heat shield on the turbo up pipe has broken off it`s flange (total bitch to get to) so let it rattle 4 a bit

Pete
Reply
Old May 2, 2002 | 12:25 PM
  #5  
Lozza's Avatar
Lozza
Thread Starter
Scooby Regular
 
Joined: Aug 2002
Posts: 1,473
Likes: 0
Post

Thanks guys - apparently it was a plate underneath had come loose so he welded it back on and its fine now - phew
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
Sam Witwicky
Engine Management and ECU Remapping
17
Nov 13, 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
Oct 2, 2015 05:26 PM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
Jamesh10
General Technical
3
Oct 1, 2015 11:56 PM




All times are GMT +1. The time now is 04:46 AM.