Why I hate Derdyshire roads!!!!
09 August 2011, 05:35 PM
#1
Scooby Regular
Thread Starter
Join Date: Jul 2011
Location: Chesterfield
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Why I hate Derdyshire roads!!!!
I recentely have hit a pot hole, thought i had buckled the rear o/s rear.
swapped wheels around, jacked the car up and ran it.
Car is a 2ltr 99 plate sport. (rear drum)
Removed the wheel, it looks like the hub is bent?
My question is will a hub from a wrx, forester etc fit? same spline size etc.
cheers
swapped wheels around, jacked the car up and ran it.
Car is a 2ltr 99 plate sport. (rear drum)
Removed the wheel, it looks like the hub is bent?
My question is will a hub from a wrx, forester etc fit? same spline size etc.
cheers
15 August 2011, 10:17 PM
#2
Scooby Regular
Thread Starter
Join Date: Jul 2011
Location: Chesterfield
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Got around to sorting it this w/end.
A quick trip down to deatons and removed a hub from a WRX plus all the lateral links and trailing arms (only one long bolt for lateral links left on the car). Could not believe the condition of it, under the car very little rust, unlike the ones on mine. Very tired
Old hub inner edge looks like bearing had spun on it, even though no play could be felt.
http://tinypic.com/view.php?pic=21b3m2x&s=7
New bearing and back together, car feels tighter and still n/s still to do.
A quick trip down to deatons and removed a hub from a WRX plus all the lateral links and trailing arms (only one long bolt for lateral links left on the car). Could not believe the condition of it, under the car very little rust, unlike the ones on mine. Very tired
Old hub inner edge looks like bearing had spun on it, even though no play could be felt.
http://tinypic.com/view.php?pic=21b3m2x&s=7
New bearing and back together, car feels tighter and still n/s still to do.
Thread
Thread Starter
Forum
Replies
Last Post