Gear linkage inside gearbox
#1
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Oct 2009
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Gear linkage inside gearbox
Hi guys,
I've got a problem with the gear shift in my STI V2 gearbox:
When I move my gear lever from neutral position left or right (without engaging any gear), it won't relocate to neutral.
Of course, I've fitted the external spring (directly on the linkage underneath the gear lever) correctly, but I assume the gear linkage is pretensioned inside the gearbox as well.
The pretensioning system inside the box should be situated underneath this round cover:
Is it possible to remove this cover by loosening the 3 screws, or do I have to remove the rear end cover?
Can I simply change the tensioner?
Thanks,
Rudi
I've got a problem with the gear shift in my STI V2 gearbox:
When I move my gear lever from neutral position left or right (without engaging any gear), it won't relocate to neutral.
Of course, I've fitted the external spring (directly on the linkage underneath the gear lever) correctly, but I assume the gear linkage is pretensioned inside the gearbox as well.
The pretensioning system inside the box should be situated underneath this round cover:
Is it possible to remove this cover by loosening the 3 screws, or do I have to remove the rear end cover?
Can I simply change the tensioner?
Thanks,
Rudi
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM