Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

how much

Thread Tools
 
Search this Thread
 
Old 30 March 2002, 09:39 PM
  #1  
rich a
Scooby Regular
Thread Starter
 
rich a's Avatar
 
Join Date: Feb 2002
Posts: 420
Likes: 0
Received 0 Likes on 0 Posts
Post

Was quoted £650 for down pipe from scoobysport to fit on my uk300ppp,has anybody had this done,is it worth it.

Cheers

Rich
Old 31 March 2002, 02:25 PM
  #2  
rich a
Scooby Regular
Thread Starter
 
rich a's Avatar
 
Join Date: Feb 2002
Posts: 420
Likes: 0
Received 0 Likes on 0 Posts
Question

Come on someone must know...please
Old 31 March 2002, 07:05 PM
  #3  
Mr Footlong
Scooby Regular
iTrader: (7)
 
Mr Footlong's Avatar
 
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes on 0 Posts
Post

Something is seriously wrong with that price if you are just after a downpipe!

They are the same price as the pre-facelift downpipes, according to Scoobysport, at £180+VAT+fitting. I am an idiot and I have done a downpipe swap with just axle stands in well under an hour, so won't be that expensive for SS to whack on for you

The downpipe does indeed make a good difference to the car. Dunno what the cat setup is like on the new fellas, but the old girls breath far more easily in comparison, which is most deffo a good thing!
It is a bummer to have to slap it back on at each MOT, but you won't be having to do that for a while
It is nice to hear the turbo quietly singing to you at low speeds too

Do it, you know you want to!!!

Cheers,

Nick

P.S. If it is the whole exhaust system that you are going on about, then rest assured, you are getting one of the best, with excellent performance gains like the big boys, but without a lot of the excess noise. Excellent choice
Old 31 March 2002, 07:54 PM
  #4  
rich a
Scooby Regular
Thread Starter
 
rich a's Avatar
 
Join Date: Feb 2002
Posts: 420
Likes: 0
Received 0 Likes on 0 Posts
Post

Cheers for the info,the price quoted to me was for down and up pipe not full system,do you think its worth doing whole system replacing my prodrive bits.I also thought price was high and when questioned they said its four hrs labour.

Rich
Old 31 March 2002, 08:01 PM
  #5  
Mr Footlong
Scooby Regular
iTrader: (7)
 
Mr Footlong's Avatar
 
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes on 0 Posts
Post

Up Pipe?

4 hours labour is way over the top, IMO.
Deffo better than the Prodrive stuff, I am surprised that other on here are not answering this one too?
Forget them for fitting, as whoever you spoke to blatantly made that figure up for fitting, unless thay have radicaly changed from the older models. Email them and you should get a decent answer..... I could be wrong withn the fitting time, but like I said as a muppet I have swapped a downpipe flat on my back mostly in under an hour, properly.

If not, contact www.subaru4you.co.uk, based in thatcham, Berkshire, check whether they can fit the parts and how much to do so, order the bits from Scoobysport and book her in with them. Good company, have had services, brake upgrades and other bits done too by them.

Cheers,

Nick
Old 31 March 2002, 08:06 PM
  #6  
rich a
Scooby Regular
Thread Starter
 
rich a's Avatar
 
Join Date: Feb 2002
Posts: 420
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up

Thanks a lot for your help,i didn't understand what he meant about up pipe either. I will take your advice and order from them and get dealers in thatcham to fit.

Cheers

Rich
Old 31 March 2002, 08:39 PM
  #7  
Mr Footlong
Scooby Regular
iTrader: (7)
 
Mr Footlong's Avatar
 
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes on 0 Posts
Question

Does anybody else know what exactly is meant by this 'Up Pipe' thing?

Is there something radically different to the new WRX's that requires this part?

Cheers,

Nick
Old 31 March 2002, 08:48 PM
  #8  
stevejohnson511
Scooby Regular
 
stevejohnson511's Avatar
 
Join Date: Jan 2002
Posts: 303
Likes: 0
Received 0 Likes on 0 Posts
Post

The new WRX has an extra cat in the up pipe which is the
other side of the turbo, its quite difficult to get to so
thats probably why theres such a big labour charge.
Steve
Old 31 March 2002, 08:49 PM
  #9  
Hanslow
Scooby Regular
 
Hanslow's Avatar
 
Join Date: Mar 2001
Location: Derbyshire
Posts: 4,496
Likes: 0
Received 0 Likes on 0 Posts
Question

Think it was something to do with just the new WRXs. They have a small up-pipe as well which I think also has a small cat in it (not the meowing variety ).

I think without the uppipe change at the same time as downpipe, it can run into overboost problems....but then I could be talking out my backside Just remember reading some previous posts about this in the drivetrain section (I think....)
Old 31 March 2002, 08:59 PM
  #10  
Mr Footlong
Scooby Regular
iTrader: (7)
 
Mr Footlong's Avatar
 
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up

Ah, the people that actually know what they are talking about are starting to surface. Thank god for that!

Cheers,

Nick
Old 31 March 2002, 09:09 PM
  #11  
Hanslow
Scooby Regular
 
Hanslow's Avatar
 
Join Date: Mar 2001
Location: Derbyshire
Posts: 4,496
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up

I knew it was around here somewhere......

Check 'dis out Meeeeooowwww (Lot's of cat talk and up-pipes )




All times are GMT +1. The time now is 01:19 AM.