DCCD FAULT CODE DIAGNOSTIC STI 8
#1
DCCD FAULT CODE DIAGNOSTIC STI 8
Can anyone tell me how to diagnose and clear a DCCD fault?
>> STi Version 8
Problem at present - Flashing and held at '0'
Tried searching for this but no joy up to now.
Thanks.
>> STi Version 8
Problem at present - Flashing and held at '0'
Tried searching for this but no joy up to now.
Thanks.
#2
- hand brakes on
- turn ignition on and turn your auto to manual mode
- turn lock to unlock x 20 times
- hold accelerator till codes blink on number zero on the dccd and read the code
- 1 sec blink = 10 , quick blink = 1
- turn ignition on and turn your auto to manual mode
- turn lock to unlock x 20 times
- hold accelerator till codes blink on number zero on the dccd and read the code
- 1 sec blink = 10 , quick blink = 1
#3
Thanks for the reply, I can get into the diagnostic now using your prescribed method.
I disconnected the battery before doing this and it gives 2 flashes/sec which means all clear apparantely.
I will do a road test later on to confirm if clear.
Ty.
I disconnected the battery before doing this and it gives 2 flashes/sec which means all clear apparantely.
I will do a road test later on to confirm if clear.
Ty.