$tazzy$

HI ALL JUS AFTER SOME FEEDBACK ON WHICH IS BEST A PANEL FILTER OR AN K N OR OTHER BRAND INDUCTION KIT.

HAVE HEARD A PANEL FILTER IS JUST AS GOOD AS THE FULL INDUCTION KIT ?

TRYING TO DECIDE WHICH WAY TO GO AND HOPEIN SOMEONE CAN SWAY ME ?!?!?

THANKS ALL

corradoboy

First of all, you have one of these...

...so please use it

Second, the forum has one of these.....

....so please use that

Thirdly, to show I can be helpful even to newbies Induction kits are not recommended on cars running below 350bhp, and even then must be combined with a good cold air feed and be securely mounted. If the cold air is not present then high intake temps can reduce power, and if not well bracketed then vibrations can damage the delicate MAF sensor (particularly on 98-00 cars). I'd always recommend a good panel from the likes of JR Racing/Green/K&N/STi.

Welcome to SNet

Oh, and drop the silly font

911

Taz:

I have an Sti V3 running 407 bhp on stock induction but with a panel filfter from Green Cotton.
The car ran 314 bhp once on a Halfords replacement filter (I was desperate at the time!)

I would avoid the racey/bling induction kits, get lots of COLD air to the inlet from the inner wing/ducting.
Feeding a 500x400 monster engine will need a different approach...

All IMHO...

Graham.

corradoboy

Oh, forgot to mention; stay well clear of ITG filters. They're known to damage MAF's due to excessive oilliness.

$tazzy$

thanks for your help mate, was going to go for the k n panel filter and think thats where ill go.