fuel pressure
22 January 2005, 04:39 PM
#1
Scooby Regular
Thread Starter
Join Date: Oct 2004
Location: thanet
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
fuel pressure
hi,
ive just had full decat exhaust fitted front mount intercooler,had an induction kit and dump valve,on a 95 wrx wagon,also had uprated fuel pump and regulator fitted,after driving her home im getting judder on constant throttle,the fuel pressure is set to 3.5bar,does anyone know if this is to high a pressure,
thanks
trekkker
ive just had full decat exhaust fitted front mount intercooler,had an induction kit and dump valve,on a 95 wrx wagon,also had uprated fuel pump and regulator fitted,after driving her home im getting judder on constant throttle,the fuel pressure is set to 3.5bar,does anyone know if this is to high a pressure,
thanks
trekkker
22 January 2005, 05:26 PM
#3
Scooby Regular
Join Date: May 1999
Location: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
How did you set 3.5bar, with the vacuum pipe on, or off ?
3.5bar at "atmospheric" (hose off) would be ok, but if you adjusted it when the hose was on, it's going to be very rich.
Try re-setting it to 3.2 bar, hose off. Ideally, the engine needs to be warm.
Mark.
3.5bar at "atmospheric" (hose off) would be ok, but if you adjusted it when the hose was on, it's going to be very rich.
Try re-setting it to 3.2 bar, hose off. Ideally, the engine needs to be warm.
Mark.
22 January 2005, 05:33 PM
#4
Scooby Regular
Thread Starter
Join Date: Oct 2004
Location: thanet
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the info ill have a look tomorrow,not knowing exactly what im doing could somone explain in a easy way so i know what to do,
thanks
trekkker
thanks
trekkker
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM