Can I wrap my...
#1
Scooby Regular
Thread Starter
Join Date: Jan 2004
Location: Being hunted down and killed one by one
Posts: 10,235
Likes: 0
Received 0 Likes
on
0 Posts
Can I wrap my...
..original exhaust after I’ve ported it or will it crack???
Any help/info much appreciated
WW
Any help/info much appreciated
WW
Trending Topics
#9
Former Sponsor
iTrader: (48)
Providing you port the headers properly you will get a noticable power improvement. Just ask Rich Wild or pole any of the numerous people who have had ported headers from me.
You will have to remove the heat shields which are usually in very poor condition and then you will have to cut off the cast lugs supporting the heat shields. This along with the porting is a dirty arduous job. Don`t forget that the uppipe also needs doing.
You will need a full roll, 50 feet of 2" DEI Exhaust Wrap along with suitable tie wire. I also use a special tool for twisting the tie wire.
I have never heard of wrapped OE headers cracking or any other problems associated with the wrapping and I think that it is another one of these myths that pervades scoobynet from time to time.
www.geocities.com/harveysmith3000
PS: I have three or four sets of OE headers here, one of which is in brand new condition, including heat shields from an STi 5 if anybody is looking for a set of OE headers. Alternatively I could port a set here and exchange for unported.
You will have to remove the heat shields which are usually in very poor condition and then you will have to cut off the cast lugs supporting the heat shields. This along with the porting is a dirty arduous job. Don`t forget that the uppipe also needs doing.
You will need a full roll, 50 feet of 2" DEI Exhaust Wrap along with suitable tie wire. I also use a special tool for twisting the tie wire.
I have never heard of wrapped OE headers cracking or any other problems associated with the wrapping and I think that it is another one of these myths that pervades scoobynet from time to time.
www.geocities.com/harveysmith3000
PS: I have three or four sets of OE headers here, one of which is in brand new condition, including heat shields from an STi 5 if anybody is looking for a set of OE headers. Alternatively I could port a set here and exchange for unported.
#10
Scooby Regular
Thread Starter
Join Date: Jan 2004
Location: Being hunted down and killed one by one
Posts: 10,235
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info Harvey
How much are your ported headers by the way, I think you’d better pm me the price
WW
How much are your ported headers by the way, I think you’d better pm me the price
WW
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM