Injectors question
#1
Scooby Regular
Thread Starter
Injectors question
Hi there,
Do I need larger injectors ?
MY02 STI uk, Prodrive exhaust with sports cat,Tek3, APS TMIC, cold air feed, breather mod, GT spec headers to go on.
Another remap due soon (due to headers).
Long term goal TD05/06-20g turbo.
Will I need 650cc injectors at some point, or are my existing ones ok ?
Any harm in fitting bigger ones ?
Best place to buy them from ?
Thanks.
Do I need larger injectors ?
MY02 STI uk, Prodrive exhaust with sports cat,Tek3, APS TMIC, cold air feed, breather mod, GT spec headers to go on.
Another remap due soon (due to headers).
Long term goal TD05/06-20g turbo.
Will I need 650cc injectors at some point, or are my existing ones ok ?
Any harm in fitting bigger ones ?
Best place to buy them from ?
Thanks.
Last edited by marklemac; 18 January 2005 at 11:21 PM.
#2
Scooby Regular
Thread Starter
anyone care to comment please ?
If bigger injectors were fitted, can the car run ok until a remap had taken place ?
If bigger injectors were fitted, can the car run ok until a remap had taken place ?
#3
Mark what power you have currently?
I saw in a friends car that after 350-360ps it needs bigger injectors but this isn't same for all STI's as your tuner may adjust your car to work perfectly with lower IDC.
Of course if your goal is 400 and more at the flywheel you need them ASAP.
JIM
I saw in a friends car that after 350-360ps it needs bigger injectors but this isn't same for all STI's as your tuner may adjust your car to work perfectly with lower IDC.
Of course if your goal is 400 and more at the flywheel you need them ASAP.
JIM
#4
Scooby Regular
Thread Starter
Car is running around 325 at the moment, and headers are to be fitted soon.
Didn't want to go for another remap once headers were fitted to find out that the recommendation would be to get bigger injectors and then the potential of the car is down... Like I said, goal by end of this year is to have a TD05/06-20G fitted and aiming for around 380+ ........
Didn't want to go for another remap once headers were fitted to find out that the recommendation would be to get bigger injectors and then the potential of the car is down... Like I said, goal by end of this year is to have a TD05/06-20G fitted and aiming for around 380+ ........
#7
Mark if you add headers you increase volumetric efficiency of your engine and it's the same as you fit a bigger turbo.
IMHO don't change headers if you plan to go TD05/06 route otherwise you'll loose low down remarkably, doesn't matter what mods you have, what matters is the overall volumetric efficiency and this will increase with the headers.
Try first and then decide.
JIM
IMHO don't change headers if you plan to go TD05/06 route otherwise you'll loose low down remarkably, doesn't matter what mods you have, what matters is the overall volumetric efficiency and this will increase with the headers.
Try first and then decide.
JIM
Trending Topics
#8
Scooby Regular
Thread Starter
OK, Jim.
Headers will be fitted in the next 4 weeks, so I'll report back then
Headers will be fitted in the next 4 weeks, so I'll report back then
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM