steering wheel virbrates alot after changing pads
#1
Scooby Regular
Thread Starter
Join Date: Sep 2004
Location: herts....
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
steering wheel virbrates alot after changing pads
hi
i have just changed some new EBCs.... after fitting i went on the motorway, and the steering wheel starts to virbrate very hard when hitting above 60mph, can anyone tell me what happened... and i am very worried
my car is a 94 WRX import with standard brakes.... EBC front disc
thanks
kev
i have just changed some new EBCs.... after fitting i went on the motorway, and the steering wheel starts to virbrate very hard when hitting above 60mph, can anyone tell me what happened... and i am very worried
my car is a 94 WRX import with standard brakes.... EBC front disc
thanks
kev
#3
Scooby Regular
Thread Starter
Join Date: Sep 2004
Location: herts....
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by mark@wrx
Have you checked the wheel nuts are properly tightened? Torque them to 65lbs/ft
#5
i would either say the pads where a tight fit and not moving freely,so they will be touching the disc and creating high spots on the disc or your wheels may have been balanced on the car at sometime and now you have taken them off they will need doing again,jack car up and check that wheel will rotate freely,also when driving put foot on brake slightly and see if you can feel brake pedal kicking back slightly.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM