911

Just cannot find a pic of a stock Sti V8 with a pic of the TMIC!
Thinking of putting one in my Sti v3, so could do with a pic to cpmpare installations.
Any help please, especially if you have done such a thing!

911

stevebt

iTrader: (8)

there is one of my car on here in the drive train section do a search for sti8 intercooler and you will find it

jonny gav

iTrader: (1)

save you the bother-



not a hard job to be honest, never done one on a v3 though.

stevebt

iTrader: (8)

jonny since you fitted this ive nad to do some work getting this intercooler higher to stop the metal intakes on the intercooler hitting the rim on the bulk head was going to get proper brackets made, but harvey solved the problem for me

jonny gav

iTrader: (1)

yeah harvey told me, at least you didn't have to re-work the bulkhead like we were told had to be done.

maybe it has to be done with the v3/4 to get it to fit.

think there is a thread on 22B about fitting one to a v3/4

911

Thanks everyone. The STi TMIC I wanted seems sold, and I think I insulted him with the offer I made too, (sorry if you read this) so will continue the search!

Actually, all I want to do is fit an up rated TMIC in anticipation of the mods I'm making to the engine. Any ideas as an alternative, but cheap as the 6 speeder must take priority!

911

stevebt

iTrader: (8)

911 dont know what offer you made but i know of a salvage yard in ireland and the last person i gave the addy to got a STI8 intercooler for £140 cue neilo

911

I offered more than that!
Steve, can you let me know on pm please?
Don't know neilo.

do they do 6 speeders for the same money?

911

jonny gav

iTrader: (1)

if you can't get an sti one the wrx intercooler of the same MY isn't a lot smaller.

its better than the one you are using now and you should be able to get one quite cheap.

the going rate seems to be £250 for the sti and 150 for the wrx.

Mark A

iTrader: (1)

I used the standard my01 WRX one which I bought for £150. As Jonny says it worked well and fitts nicely with the face lifted bonnet. It would be an easy upgrade if you could find some inlet spacers to lift it above the bulkhead seam and servo pipe.

Mark

micared

911, I've got a wrx i/c from an 02 car for sensible money, if you end up deciding to take that route.

911

Thanks as ever to everyone.
Wasn't planning on changing the TMIC, but Bob's5 put a doubt in my mind.
micared, will contact you soon, I have 2 irons in the Sti camp at the moment, will keep your offer in mind if all goes pear shaped.

Still can't find a 6 speeder for sensible £££.....

911

micared

911, no problem, haven't advertised it anywhere, chances are it'll still be here if you need it. Good hunting!

CustomScoobyIOM

If you meant me Graham you didn't mate

But it isn't off the car yet due to delays on others cars. So mine is the last to be done

911

No jon, not you this time!
Meant to ask you about the 'fans' in your pm to me. Can you let me know?
Sti's dont come with fans as standard do they?

Should have followed your example, sold the Sti v3 and bought a newer one with all the mods I'm adding....

911