Octane booster mixing
09 June 2004, 10:42 PM
#1
Scooby Regular
Thread Starter
Join Date: Jan 2002
Location: The Land of the Great and the Good
Posts: 715
Likes: 0
Received 0 Likes
on
0 Posts
Octane booster mixing
Used 1/3 of a tin of proboost tonight in £20 worth of o.max , getting major activity on Knocklink would it be ok to put in NF without using proboost treated fuel first?
10 June 2004, 08:49 AM
#2
Scooby Regular
Join Date: May 2003
Posts: 2,031
Likes: 0
Received 0 Likes
on
0 Posts
I would recommend using NF Race over Proboost (I used to be a fan of this though was converted over to NF).
You may well have picked up a bad tank of fuel from the garage so on the first treatment I would personally put the full 330 ml in, this will raise the ron content by about 6; certainly getting rid of or eliminating any pre det or det
(If it doesn't get an engine diagnostic done quickly & drive off boost)
After the first treatment of NF then follow the recommended dosage of 50ml per tank. Again I personally use 100 ml per tank, though I do need to treat the engine well...
You may well have picked up a bad tank of fuel from the garage so on the first treatment I would personally put the full 330 ml in, this will raise the ron content by about 6; certainly getting rid of or eliminating any pre det or det
(If it doesn't get an engine diagnostic done quickly & drive off boost)
After the first treatment of NF then follow the recommended dosage of 50ml per tank. Again I personally use 100 ml per tank, though I do need to treat the engine well...
Thread
Thread Starter
Forum
Replies
Last Post
oilman
Trader Announcements
15
01 October 2015 11:55 AM