Boost take ages to build up ?
18 March 2004, 09:41 AM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2003
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Boost take ages to build up ?
My poor old scoob is taking time to spool up, the 3 port solenoid is clicking its t*its off, is the actuator faulty or the boost solenoid. When it finally gets there it struggles a measly 0.65 bar.
18 March 2004, 03:28 PM
#3
Scooby Regular
Join Date: Jul 2000
Location: Lancashire
Posts: 2,209
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like a leak of some sort, if it's only slight you may not hear it but it will cause this.
Connect the bleed nipple on the compressor cover directly to the wastegate actuator and see if you get to 0.5-0.6bar quicky. Also try borrowing an MBC of some sort and seeing if that cures it.
Andrew...
Connect the bleed nipple on the compressor cover directly to the wastegate actuator and see if you get to 0.5-0.6bar quicky. Also try borrowing an MBC of some sort and seeing if that cures it.
Andrew...
Thread
Thread Starter
Forum
Replies
Last Post