Looking for part no's for AP products
#1
As i have a cunning plan (ok then, may be able to get hold of some stuff cheaper) for my MY99 STi 5 Type R Limited
I believe that the 6pot brakes are:
CP5570-1000:G8
and the 4 pots are:
CP5200-1023
(I have 17" Oz SuperT's so fitting shouldnt be a problem with the 330mm disks)
Please correct me if I am wrong?
Also;
What AP Clutch kit would I need? (car is currently somewhere around the 300lb/ft mark, and I will be looking to improve this figure - although not by too much maybe a max of 350lb/ft) and the standard one they list on the web-site is only rated at 310lb/ft).
Also, what is the part no. for a suitable borg and beck clutch (although these are owned by AP anyhow)
I believe that the 6pot brakes are:
CP5570-1000:G8
and the 4 pots are:
CP5200-1023
(I have 17" Oz SuperT's so fitting shouldnt be a problem with the 330mm disks)
Please correct me if I am wrong?
Also;
What AP Clutch kit would I need? (car is currently somewhere around the 300lb/ft mark, and I will be looking to improve this figure - although not by too much maybe a max of 350lb/ft) and the standard one they list on the web-site is only rated at 310lb/ft).
Also, what is the part no. for a suitable borg and beck clutch (although these are owned by AP anyhow)
#3
You want the AP Organic clutch
It may only be rated 310lbs? - but the Organic one that I hae on can handle significantly more than this - Its doing ok handling over 400bhp/350lbs and has been for a couple of yrs now!
Re part no's - sorry a bit of a minefield so dont know
It may only be rated 310lbs? - but the Organic one that I hae on can handle significantly more than this - Its doing ok handling over 400bhp/350lbs and has been for a couple of yrs now!
Re part no's - sorry a bit of a minefield so dont know
#4
think i may have found the clutch on the AP page:
CP2000-18 Organic plate - CP6150-18 release bearing.
Hopefully these are the right parts, and hopefully I will find out that I can get all of them for a bargain price!!!
CP2000-18 Organic plate - CP6150-18 release bearing.
Hopefully these are the right parts, and hopefully I will find out that I can get all of them for a bargain price!!!
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM