TORQUE
#1
Right u lot of techy heads
I am looking for answers
My 97 catalunya,i have had done
1. Rms stainless down pipe cat out
2.Bleed valve fitted and hoses
3.Magnex 6*4 oval back box
That's all ant the mo,Just been to star performance yesterdayand the figure's were good.
244 bhp power out -put
225 lbf-ft torque
148.5 bhp at t wheels
peaks at 16 psi and hold's 15 psi
What can i do next to increase the torque? Power is good so don't want to go crazy just to get the about equal.
The mid section is still standard with the cat in.I dont want to go to indution kit's (to keep the noise down)
It would be intersting to see what u lot think
Ta Dougie+Diana
I am looking for answers
My 97 catalunya,i have had done
1. Rms stainless down pipe cat out
2.Bleed valve fitted and hoses
3.Magnex 6*4 oval back box
That's all ant the mo,Just been to star performance yesterdayand the figure's were good.
244 bhp power out -put
225 lbf-ft torque
148.5 bhp at t wheels
peaks at 16 psi and hold's 15 psi
What can i do next to increase the torque? Power is good so don't want to go crazy just to get the about equal.
The mid section is still standard with the cat in.I dont want to go to indution kit's (to keep the noise down)
It would be intersting to see what u lot think
Ta Dougie+Diana
#4
Hello m8,
By my aka you know I have a cat also.
Scooby full system
ITG panal
FMS DV
SuperChip running 20psi and holding 19psi
SUl
280 torque 275bhp.
My next mods already planned and paid for so here goes:
-replace mid & back box with NurSpec R (Blitz)
-replace chip with Link
-replace 380 injectors with 480
-APS front mount intercooler
-APS in arch induction goes with FMIC
-IHI VF23(22b turbo/roller bearing)(ported,flowed,balanced)
Other bits also brakes,suspension,
I am looking to get 350 bhp 330 torque runing at 19psi
I would get a good ECU, like Link, and a bigger turbo and some guages to keep an eye on things..If my cat can do it so can yours m8!
Moe
By my aka you know I have a cat also.
Scooby full system
ITG panal
FMS DV
SuperChip running 20psi and holding 19psi
SUl
280 torque 275bhp.
My next mods already planned and paid for so here goes:
-replace mid & back box with NurSpec R (Blitz)
-replace chip with Link
-replace 380 injectors with 480
-APS front mount intercooler
-APS in arch induction goes with FMIC
-IHI VF23(22b turbo/roller bearing)(ported,flowed,balanced)
Other bits also brakes,suspension,
I am looking to get 350 bhp 330 torque runing at 19psi
I would get a good ECU, like Link, and a bigger turbo and some guages to keep an eye on things..If my cat can do it so can yours m8!
Moe
#5
Lo topcat
Cool another cat owner
That all sounds pricey, 20 psi pritty good,guess that the ecu has been altered to suit as you r running 20 and holding 19 psi.
I got over boost at 18 psi on our's that's why it's down at 16-15psi.
We are only running nul fue, dose super make that much of a diffrence then.
Dougie+Diana
Cool another cat owner
That all sounds pricey, 20 psi pritty good,guess that the ecu has been altered to suit as you r running 20 and holding 19 psi.
I got over boost at 18 psi on our's that's why it's down at 16-15psi.
We are only running nul fue, dose super make that much of a diffrence then.
Dougie+Diana
#6
what can i say TC, i have got all what you are planning to get and it is an awesome set up. but i am sure dougie knows that.
here is a good advise for you
link
vf23
are the best two mods i have done
here is a good advise for you
link
vf23
are the best two mods i have done
#7
what can i say TC, i have got all what you are planning to get and it is an awesome set up. but i am sure dougie knows that.
here is a good advise for you
link
vf23
are the best two mods i have done
here is a good advise for you
link
vf23
are the best two mods i have done
Trending Topics
#8
Yep a new computer, not a chip or piggy back system. Say a link or Motec one of the best options as you can do away with the MAF sensor which will increase power and torque, and you can tune it for power or torque when every you need.
Dan
Dan
Thread
Thread Starter
Forum
Replies
Last Post