knocking the cat out of the oem downpipe
#1
Quite simple really, I'm a cheapskate and theres nothing wrong with the downpipe apart from the cat. Has anyone done this. Can it be done? Please help as can't afford 200squid for a part that isn't broke.
Thanks, Olly.
Thanks, Olly.
#2
I've done this, I was also modifying the downpipe mouth to full width, so i cut the whole mouth side pipe off at the top of the cats can with a hand saw. Then taking a length of steel rod, pounded it thru the cat material, once getting a few holes punched through the middle, it begins to collapse on itself easier, flip the pipe up and let the bits all fall out, including a wire mesh around it holding it in place.
Then i had the mouth/neck pipe which i had modified separately, welded back on.
Then i had the mouth/neck pipe which i had modified separately, welded back on.
#4
Scooby Senior
Join Date: Oct 2000
Location: Zurich, Switzerland
Posts: 3,105
Likes: 0
Received 0 Likes
on
0 Posts
Yep, can be done no problems what so ever. If emissions are still important I'd recommend cutting out the centre cat and replacing it with a hi-flow sports item.
Richard
Richard
#5
I've also seen this done,its not so critical as the DIY up-pipe de-cat as no left over pieces are going to damage any Turbo parts.
Just dont stand behind the car when running after you refit it,LOL.
Go to scoobymods.com for a detailled explanation and pictures of how to do this.
Zippy
Just dont stand behind the car when running after you refit it,LOL.
Go to scoobymods.com for a detailled explanation and pictures of how to do this.
Zippy
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM