Are my injectors going to cope?
01 January 2004, 03:40 PM
#1
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: Yate, Bristol
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
I have a UK MY97 With full decat, K&N Induction kit, Dawes at 1.2bar, Samco's and a Forge VTA.
I'm getting a Power Engineering remap done in march. During the year I hope to fit a uprated fuel pump and reg, a VF35 Turbo, and an FMIC, and of course a further remap after fitting the above mods.
Will my standard injectors be OK after raising the fuel pressure with the uprated reg?
I'm getting a Power Engineering remap done in march. During the year I hope to fit a uprated fuel pump and reg, a VF35 Turbo, and an FMIC, and of course a further remap after fitting the above mods.
Will my standard injectors be OK after raising the fuel pressure with the uprated reg?
01 January 2004, 06:13 PM
#2
Scooby Regular
Join Date: Mar 2003
Location: The Netherlands
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
to get the full benefit you should upgrade the injector's i assume
I'm running the same modification's and my injectors (440CC) are nearly maxed out i believe
i'm running 1.4 at the VF35
I'm running the same modification's and my injectors (440CC) are nearly maxed out i believe
i'm running 1.4 at the VF35
02 January 2004, 09:31 AM
#4
Scooby Regular
Thread Starter
Join Date: Jul 2002
Location: Yate, Bristol
Posts: 1,460
Likes: 0
Received 0 Likes
on
0 Posts
Cheers mate but the turbo/fmic wont be happening for a little while yet, I'll get some injectors nearer the time.
[Edited by DreXeL - 1/2/2004 9:33:08 AM]
[Edited by DreXeL - 1/2/2004 9:33:08 AM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM