Replacement for Fujitsubo exhaust
20 October 2003, 09:18 AM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2003
Location: Guernsey
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
I have a Fujitsubo exhaust on my 1994 WRX which comprises a 3" bore and 4" tailpipe - there is the back box and two sections before this.
Other than buying a replacement Fujitsubo from UpAuto which seems very expensive which I have picked up from previous posts does anyone know of a replacement system ?.
Other than buying a replacement Fujitsubo from UpAuto which seems very expensive which I have picked up from previous posts does anyone know of a replacement system ?.
20 October 2003, 09:23 AM
#2
Scooby Regular
Join Date: Oct 2002
Location: At Tescos Filling Up With 99 Octane!!!
Posts: 4,313
Likes: 0
Received 0 Likes
on
0 Posts
Whats wrong with yours?
If you just want a change there are plenty of different one available just have a look around on here...
If you just want a change there are plenty of different one available just have a look around on here...
20 October 2003, 09:30 AM
#3
Scooby Regular
Thread Starter
Join Date: Feb 2003
Location: Guernsey
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
The back box has rusted through on the seams and the section before this is peppered with holes - it needs relacing !.
The majority of systems I have seen seem to be two section whereas the Fujitsubo has three sections and has a differnet mid point joining point.
The majority of systems I have seen seem to be two section whereas the Fujitsubo has three sections and has a differnet mid point joining point.
20 October 2003, 09:33 AM
#4
Scooby Regular
Join Date: Jul 2003
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
best off probably replacing the system (cat back if u already have changed these!) and any system will be far cheaper than the fujitsubo ! even if u change the front downpipe and 2nd cat
Have a look at tsl or blitz!
[Edited by timmyjmy93wrx - 10/20/2003 9:34:41 AM]
Have a look at tsl or blitz!
[Edited by timmyjmy93wrx - 10/20/2003 9:34:41 AM]
20 October 2003, 11:07 PM
#5
Or Scoobysport, Xtreme Scoobies, or even the maufacturers of many exhausts, Hayward and Scott.
Talking around £290 back box ? , £90 centre, £180 downpipe if you do the whole lot,
Talking around £290 back box ? , £90 centre, £180 downpipe if you do the whole lot,
31 October 2003, 09:04 AM
#6
I would go for a Pat Special Exhaust, 3 1/4 inch complete system (mid-section/backbox), what I use on my beast. I also have a custom downpipe, but a normal 3" one such as bpm twin-dump or similiar I would recommend.
[Edited by ChristianR - 10/31/2003 9:05:31 AM]
[Edited by ChristianR - 10/31/2003 9:05:31 AM]
Thread
Thread Starter
Forum
Replies
Last Post
