How do you remove Impreza Driveshafts
26 August 2003, 01:59 PM
#1
Former Sponsor
Thread Starter
iTrader: (53)
Join Date: Mar 2003
Posts: 2,912
Likes: 0
Received 0 Likes
on
0 Posts
Iam having trouble removing the front driveshafts on my93 WRX Turbo Import (saloon).Do you need a special tool or something.The engine is removed but gearbox still fitted.Any help would be great.
26 August 2003, 02:05 PM
#2
Should be a roll pin through the gearbox side of the CV joint. Punch this out and the CV joint and driveshaft should come offf the g'box complete.
Don't get the punch stuck in the CV join though, just ask david wallis about that one
paul
Don't get the punch stuck in the CV join though, just ask david wallis about that one
paul
26 August 2003, 11:04 PM
#5
)Trending Topics
27 August 2003, 10:08 PM
#8
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
The fronts have pins..
But I just crawled underneath the rear and no pins and the driveshaft ends are slightly different.
Whether they just pull off once you have removed the other end and the hubs I dunno?
JGM
But I just crawled underneath the rear and no pins and the driveshaft ends are slightly different.
Whether they just pull off once you have removed the other end and the hubs I dunno?
JGM
28 August 2003, 07:08 PM
#9
Scooby Regular
iTrader: (1)
Join Date: Oct 2001
Location: South East
Posts: 1,300
Likes: 0
Received 0 Likes
on
0 Posts
well thats what happened when my rear bearing inner seal was changed! pull the long bolt out. carefully leaver the hub from the diff & then it pulls out!
just couldnt remember a pin !
Steve
just couldnt remember a pin !
Steve
Thread
Thread Starter
Forum
Replies
Last Post
