How good is the knockilink
14 August 2003, 12:54 PM
#1
Scooby Regular
Thread Starter
Join Date: Apr 2003
Posts: 330
Likes: 0
Received 0 Likes
on
0 Posts
Hi All,
I have the knocklink set up with max sensitivity and tested with light taps. i have been getting the occasional amber and backing off straight away. the problem is i can hear what sounds just like det at around 3k and the KL doesnt, is there any reason the knocklink would not show this up ??
Cheers All
One very paranoid scooby owner
I have the knocklink set up with max sensitivity and tested with light taps. i have been getting the occasional amber and backing off straight away. the problem is i can hear what sounds just like det at around 3k and the KL doesnt, is there any reason the knocklink would not show this up ??
Cheers All
One very paranoid scooby owner
14 August 2003, 01:09 PM
#2
Scooby Regular
Join Date: Jan 2003
Posts: 932
Likes: 0
Received 0 Likes
on
0 Posts
its probably not det.
To the other extreme, I have a STI5 TypeR and if I run Optimax with NO octaine booster on a hot day, I get no det at all either. Even when resetting the ECU back to Jap standard (e.g. no learning process)
Different cars perform differently.
If you can lightly tap the block near the mic and light up the LED's on the display (and your mic is situated correctly) then you can trust it.
To the other extreme, I have a STI5 TypeR and if I run Optimax with NO octaine booster on a hot day, I get no det at all either. Even when resetting the ECU back to Jap standard (e.g. no learning process)
Different cars perform differently.
If you can lightly tap the block near the mic and light up the LED's on the display (and your mic is situated correctly) then you can trust it.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM