Rear muffler - classic compared with bug-eye
#4
I'm pretty sure it just needs a different 'arm' - the APS units fit both, just have 2 arms in different places - one for the classic, one for the fugly. So it can just be welded on.
#7
Having set up a jig to hold a 'classic' system and put in a 'bug-eye' system. It becomes apparent that the main difference in the 2 parts is the hanger in front of the box.
We cut off the front hanger close to the pipe and moved it from the RHS of the pipe to the LHS and welded it in the correct position.
The box is a little longer and comes very close to the anti-roll bar on my mates car (00MY), he is inserting an extra 8 mm flange as a spacer. The STi 7 system I fitted on mine (97MY) seemed to be OK with regard to clearance to the anti-roll bar.
We are both pleased with the results.
I will see if I can post any photos of the mods.
Cheers
Mick
[Edited by Mick - 10/17/2003 10:59:24 AM]
We cut off the front hanger close to the pipe and moved it from the RHS of the pipe to the LHS and welded it in the correct position.
The box is a little longer and comes very close to the anti-roll bar on my mates car (00MY), he is inserting an extra 8 mm flange as a spacer. The STi 7 system I fitted on mine (97MY) seemed to be OK with regard to clearance to the anti-roll bar.
We are both pleased with the results.
I will see if I can post any photos of the mods.
Cheers
Mick
[Edited by Mick - 10/17/2003 10:59:24 AM]
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM