Ted Ed

My scoob my00 has full decat and a PE Tek2 remap and has the above figures.

If I wanted to go further.....ie:

FMIC
Bigger Turbo
Fuel Pump
Injectors etc etc

WHO would you use and trust with somthing like that

any comments or recommendations would be appreciated.

Thanks

Simon

Oh !!!! 320bhp/300ftlb ish would be nice

john banks

For an extra 45 BHP and 35 lbft you could keep your present injectors and TMIC.

Suggestion:

* Fuel pump & regulator/gauge
* Knocklink
* Boost gauge
* ECU remap
* VF23/24/28/29/30/34/35 or TD05

If you want more:

* Get your turbo above made into a hybrid
* FMIC
* Induction kit
* Turbo inlet pipe
* Exhaust manifold/uppipe
* Gearbox and clutch

[Edited by john banks - 7/25/2003 5:24:58 PM]

Ted Ed

John

yhm

Simon

john banks

YHM back, says this:

Fuel pump and reg/gauge from Lateral Performance £200
Knocklink from BRD £140
Boost gauge £30+
Turbos various suppliers search the many threads on here.

Ted Ed

Anybody else who has had this done offer me any advice

robski

John,

are you saying that a Tek 2 will be capable of keeping all that sorted and running over 300bhp approx 300l/bft?

robski

john banks

No

robski

oops

doh!

cheers john

Ted Ed

salsa-king

rapac

APS R/T kit 320hp(conservative tune) at the fly and no failure :Unichip,3" from turbo,high flow cat,APS panel filter(K&N), VF turbo,FMI and water spray.
More than 340hp u ll need stronger engine(forgies,rods,STI gaskets,head studs etc etc),bigger injectors(from the yellow 440cc myoo has),high flow pump, modified fuel rails,ECU (does it without that horrible air flow meter and no restriction),WI,headers and list continues??
And with that the drivetrain mods.


Cheers